| 1. | 17th International Microgravity Measurements Group Meeting |
| 2. | A Comparison of Space and Ground Based Facility Environmental Effects for FEP Teflon |
| 3. | A Cryogenic GaAs PHEMT/Ferroelectric Ku-Band Tunable Oscillator |
| 4. | A Fan Concept to Meet the 2017 Noise Goals |
| 5. | A Formulation of Asymptotic and Exact Boundary Conditions Using Local Operators |
| 6. | A Framework for a Supervisory Expert System for Robotic Manipulators with Joint-Position Limits and Joint-Rate Limits |
| 7. | A Hazardous Gas Detection System for Aerospace and Commercial Applications |
| 8. | A High Frequency Model of Cascade Noise |
| 9. | A Method for Generating Reduced-Order Linear Models of Multidimensional Supersonic Inlets |
| 10. | A Modified Through-Flow Wave Rotor Cycle With Combustor Bypass Ducts |
| 11. | A Modular PMAD System for Small Spacecraft |
| 12. | A Moving Grid Capability for NPARC |
| 13. | A Novel K-Band Tunable Microstrip Bandpass Filter Using a Thin Film HTS/Ferroelectric/Dielectric Multilayer Configuration |
| 14. | A Numerical Simulator for Three-Dimensional Flows Through Vibrating Blade Rows |
| 15. | A Parametric Study of Spur Gear Dynamics |
| 16. | A Semantic Analysis Method for Scientific and Engineering Code |
| 17. | A Simplified Model for the Investigation of Acoustically Driven Combustion Instabilities |
| 18. | A Solution to the Fundamental Linear Fractional Order Differential Equation |
| 19. | A Spherical Torus Nuclear Fusion Reactor Space Propulsion Vehicle Concept for Fast Interplanetary Travel |
| 20. | A Summary of Validation Results for LEWICE 2.0 |
| 21. | Adaptive Variable Bias Magnetic Bearing Control |
| 22. | Adjusting the Measured Weight Loss of Aged Graphite Fabric/PMR-15 Composites |
| 23. | Advanced Low Emissions Subsonic Combustor Study Final Report |
| 24. | Advanced Seal Technology Role in Meeting Next Generation Turbine Engine Goals |
| 25. | Aerodynamics of a Transitioning Turbine Stator Over a Range of Reynolds Numbers |
| 26. | An Assessment of the Axial and Radial Dilation of a DPIMS Tantalum Cartridge for Space Shuttle Flight Experiments |
| 27. | An Atmospheric Atomic Oxygen Source for Cleaning Smoke Damaged Art Objects |
| 28. | An Incidence Loss Model for Wave rotors With Axially Aligned Passages |
| 29. | An Introduction to the BFS Method and Its Use to Model Binary NiAL Alloys |
| 30. | An Overview - NASA LeRC Structures Programs |
| 31. | Analysis of a Rocket Based Combined Cycle Engine During Rocket Only Operation |
| 32. | Analysis of Inlet-Compressor Acoustic Interactions Using Coupled CFD Codes |
| 33. | Annealing Effects on Creep and Rupture of Polycrystalline Alumina-Based Fibers |
| 34. | Application of a Modified Gas Chromatograph to Analyze Space Experiment Combustion Gases on Space Shuttle Mission STS-94 |
| 35. | Application of Pressure Sensitive Paint to Confined Flow at Mach Number 2.5 |
| 36. | Atomic Oxygen Treatment as a Method of Recovering Smoke Damaged Paintings |
| 37. | Baseline Calibration of the NASA Lewis Research Center 8- by 6-Foot Supersonic Wind Tunnel (1991 and 1992 Tests) |
| 38. | Benefits of Swept and Leaned Stators for Fan Noise Reduction |
| 39. | Bubble Formation and Detachment in Liquid Form Under Normal and Reduced Gravity |
| 40. | Calculation of Multistage Turbomachinery Using Steady Characteristic Boundary Conditions |
| 41. | Challenges to Laser-Based Imaging Techniques in Gas Turbine Combustor Systems for Aerospace Applications |
| 42. | Chemical Gas Sensors for Aeronautic and Space Applications II |
| 43. | Combined Numerical/Analytical Perturbation Solutions of the Navier-Stokes Equations for Aerodynamic Ejector/Mixer Nozzle Flows |
| 44. | Comparison of Computational-Model and Experimental-Example Trained Neural Networks for Processing Speckled Fringe Patterns |
| 45. | Comparison of Graphite Fabric Reinforced PMR-15 and Avimid N Composites After Long Term Isothermal Aging at Various Temperatures |
| 46. | Comparison of High Aspect Ratio Cooling Channel Designs for a Rocket Combustion Chamber With Development of an Optimized Design |
| 47. | Convective Instability of a Gravity Modulated Fluid Layer With Surface Tension Variation |
| 48. | Crack Branching and Fracture Mirror Data of Glasses and Advanced Ceramics |
| 49. | CVD Diamond, DLC, and c-BN Coatings for Solid Film Lubrication |
| 50. | Data Analysis of a Space Experiment: Common Software Tackles Uncommon Task |
| 51. | Design and Operating Characteristics of High-Speed, Small Bore, Angular-Contact Ball Bearings |
| 52. | Design and Performance Calculations of a Propeller for Very High Altitude Flight |
| 53. | Design of Life Extending Controls Using Nonlinear Parameter Optimization |
| 54. | Design Selection and Analysis of a Swept and Leaned Stator Concept |
| 55. | Design, Construction, and Qualification of a Microscale Heater Array for Use in Boiling Heat Transfer |
| 56. | Design, Fabrication, and Testing of a High-Speed, Over-Running Clutch for Rotorcraft |
| 57. | Design, Installation, and Evaluation of an Altitude Test Facility Modification |
| 58. | Destructive Evaluation of a Xenon Hollow Cathode After a 28,000 Hour Life Test |
| 59. | Determination of Yield and Flow Surfaces for Inconel 718 Under Axial-Torsional Loading at Temperatures up to 649 °C |
| 60. | Determination of Yield in Inconel 718 for Axial-Torsional Loading at Temperatures up to 649 °C |
| 61. | Deterministic Stress Modeling of Hot Gas Segregation in a Turbine |
| 62. | Development and Characterization of SiC/MoSi2-Si3N4(p) Hybrid Composites |
| 63. | Development of UV Optical Measurements of Nitric Oxide and Hydroxyl Radical at the Exit of High Pressure Gas Turbine Combustors |
| 64. | Direct Numerical Simulation of a Coolant Jet in a Periodic Crossflow |
| 65. | Drive System Enhancements in the NASA Lewis Research Center Supersonic Wind Tunnels |
| 66. | Dryout and Rewetting in the Pool Boiling Experiment Flown on STS-72 (PBE-II B) and STS-77 (PBE-II A) |
| 67. | Dynamics of Large-Scale Structures for Jets in Crossflow |
| 68. | Dynamics of Liquids in Edges and Corners (DYLCO) IML-2 Experiment for the BDPU |
| 69. | Effect of Gravity on Surface Tension |
| 70. | Effect of Layer-Graded Bond Coats on Edge Stress Concentration and Oxidation Behavior of Thermal Barrier Coatings |
| 71. | Effect of Refractive Index Variation on Two-Wavelength Interferometry for Fluid Measurements |
| 72. | Effects of Ambient High Temperature Exposure on Alumina-Titania High Emittance Surfaces for Solar Dynamic Systems |
| 73. | Effects of Fiber Coating Composition on Mechanical Behavior of Silicon Carbide Fiber-Reinforced Celsian Composites |
| 74. | Effects of HF Treatments on Tensile Strength of Hi-Nicalon Fibers |
| 75. | Effects of Surface Area, Polymer Char, Oxidation, and NiO Additive on Nitridation Kinetics of Silicon Powder Compacts |
| 76. | Effects of Tip Clearance and Casing Recess on Heat Transfer and Stage Efficiency in Axial Turbines |
| 77. | Electric Propulsion for Low Earth Orbit Constellations |
| 78. | Electric Propulsion Options for a Magnetospheric Mapping Mission |
| 79. | Elevated Temperature Compressive Strength Properties of Oxide Dispersion Strengthened NiAl After Cryomilling and Roasting in Nitrogen |
| 80. | Emittance Theory for Cylindrical Fiber Selective Emitter |
| 81. | Energy Efficient Engine Low Pressure Subsystem Aerodynamic Analysis |
| 82. | Energy Efficient Engine Low Pressure Subsystem Flow Analysis |
| 83. | Engine Gaseous, Aerosol Precursor and Particulated Emissions at Simulated Flight Altitude Conditions |
| 84. | Engine Technology Challenges for the High-Speed Civil Transport Plane |
| 85. | EUPDF - An Eulerian-Based Monte Carlo Probability Density Function (PDF) Solver User's Manual |
| 86. | Evaluation of Advanced Solid Lubricant Coatings for Foil Air Bearings Operating at 25 and 500 °C |
| 87. | Evaluation of Boundary Conditions for the Gust-Cascade Problems |
| 88. | Evaluation of Capacitors at Cryogenic Temperatures for Space Applications |
| 89. | Evaluation of Low Earth Orbit Environmental Effects on International Space Station Thermal Control Materials |
| 90. | Evaluation of Navy 9 cst Oil in Bell Helicopter M412 HP Gearboxes |
| 91. | Evaluation of Several Space Lubricants Using a Vacuum Four-Ball Tribometer |
| 92. | Excitation of Continuous and Discrete Modes in Incompressible Boundary Layers |
| 93. | Experimental and Calculational Studies of the Interactions of BF3 With Fluoroethers |
| 94. | Experimental Investigation of Boundary Layer Behavior in a Simulated Low Pressure Turbine |
| 95. | Experimental Performance of a Micromachined Heat Flux Sensor |
| 96. | Experimental Study of Boundary Layer Behavior in a Simulated Low Pressure Turbine |
| 97. | Experimental Study of Load Carrying Capacity of Point Contacts at Zero Entrainment Velocity |
| 98. | Experiment-to-Experiment Disturbance of Microgravity Environment |
| 99. | Fabrication and Resistivity of IBr Intercalated Vapor-Grown Carbon Fiber Composites |
| 100. | Fabrication Routes for Continuous Fiber-Reinforced Ceramic Composites (CFCC) |
| 101. | Feasibility Assessment of Thermal Barrier Seals for Extreme Transient Temperatures |
| 102. | Feasibility of Various NDE Techniques to Assess and Monitor Damage in Ceramic Composites at Elevated Temperatures |
| 103. | Fiber Optic Cable Feedthrough and Sealing |
| 104. | Final Report for the Liquid Motion in a Rotating Tank Experiment (LME) |
| 105. | Fire Safety in Extraterrestrial Environments |
| 106. | Flow Field Surveys of the NASA Lewis Research Center 8- by 6-Foot Supersonic Wind Tunnel (1993 Test) |
| 107. | Flow Quality and Operational Enhancements in the NASA Lewis 8- by 6-Foot Supersonic Wind Tunnel |
| 108. | Flow/Damage Surfaces for Fiber-Reinforced Metals Having Different Periodic Microstructures |
| 109. | Flowfield Measurements in a Slot-Bled Oblique Shock-Wave and Turbulent Boundary-Layer Interaction |
| 110. | Fluids and Combustion Facility-Combustion Integrated Rack |
| 111. | Fluids and Combustion Facility-Fluids Integrated Rack |
| 112. | Forced Convection Boiling and Critical Heat Flux of Ethanol in Electrically Heated Tube Tests |
| 113. | Friction and Wear Properties of a-DLC-Based Functionally Gradient Nanocomposite Coatings |
| 114. | From the Chemistry Lab to Licensing |
| 115. | Fuel Injector Patternation Evaluation in Advanced Liquid-Fueled, High Pressure, Gas Turbine Combustors, Using Nonintrusive Optical Diagnostic Techniques |
| 116. | GaAs/Ge Solar Powered Aircraft |
| 117. | General Aviation Light Aircraft Propulsion: From the 1940's to the Next Century |
| 118. | Ground Laboratory Soft X-Ray Durability Evaluation of Aluminized Teflon FEP Thermal Control Insulation |
| 119. | Ground Laboratory Soft X-Ray Durability Evaluation of Aluminized Teflon FEP Thermal Control Insulation |
| 120. | HBCUs Research Conference Agency and Abstracts |
| 121. | Heat Transfer on a Film-Cooled Blade - Effect of Hole Physics |
| 122. | High Stability Engine Control (HISTEC) Flight Test Results |
| 123. | High Stability Engine Control (HISTEC): Flight Demonstration Results |
| 124. | High Strain Rate Deformation Modeling of a Polymer Matrix Composite Part II-Composite Micromechanical Model |
| 125. | High Strain Rate Deformation Modeling of a Polymer Matrix Composite Part I-Matrix Constitutive Equations |
| 126. | High Temperature Mechanical Characterization of Ceramic Matrix Composites |
| 127. | High-Accuracy Compact MacCormack-Type Schemes for Computational Aeroacoustics |
| 128. | HOTCFGM-1D: A Coupled Higher-Order Theory for Cylindrical Structural Components With Through-Thickness Functionally Graded Microstructures |
| 129. | Impact of Radiation Hardness and Operating Temperatures of Silicon Carbide Electronics on Space Power System Mass |
| 130. | Improved Electroformed Structural Copper and Copper Alloys |
| 131. | Improved Modeling of Finite-Rate Turbulent Combustion Processes in Research Combustors |
| 132. | Improving Customer Satisfaction in an R&D Environment |
| 133. | Indium Tin Oxide-Magnesium Fluoride Co-Deposited Films for Spacecraft Applications |
| 134. | Influence of the Biasing Scheme on the Performance of Au/SrTiO3/LaAlO3 Thin Film Conductor/Ferroelectric Tunable Ring Resonators |
| 135. | Initialization, Conceptualization, and Application in the Generalized Fractional Calculus |
| 136. | Insights Into the Fractional Order Initial Value Problem via Semi-infinite Systems |
| 137. | Institute for Computational Mechanics in Propulsion (ICOMP) Twelfth Annual Report - 1997 |
| 138. | International Space Station Cathode Life Testing Status |
| 139. | Investigation and Feasibility Assessment of TOPAZ-II Derivatives for Space Power Applications |
| 140. | Investigation of Anomalous Behavior in Metallic-Based Materials Under Compressive Loading |
| 141. | Investigation of Thermal High Cycle and Low Cycle Fatigue Mechanisms of Thick Thermal Barrier Coatings |
| 142. | Isothermal Fatigue, Damage Accumulation, and Life Prediction of a Woven PMC |
| 143. | K-Band Power Enbedded Transmission Line (ETL) MMIC Amplifiers for Satellite Communication Applications |
| 144. | Laser Pencil Beam Based Techniques for Visualization and Analysis of Interfaces Between Media |
| 145. | Launch Vehicle Performance With Solid Particle Feed Systems for Atomic Propellants |
| 146. | Linearly Tapered Slot Antenna Radiation Characteristics at Millimeter-Wave Frequencies |
| 147. | Liquid Motion Experiment Flight Test Results |
| 148. | Long Term Degradation of Polymide Composites |
| 149. | Low-Cost Production of Composite Bushings for Jet Engine Applications |
| 150. | Mach Number Effects on Turbine Blade Transition Length Prediction |
| 151. | Measurement of Xenon Viscosity as a Function of Low Temperature and Pressure |
| 152. | Mechanical Properties Degradation of Teflon FEP Returned From the Hubble Space Telescope |
| 153. | Mechanical Properties of Degraded PMR-15 Resin |
| 154. | Mechanical System Analysis/Design Tool (MSAT) Quick Guide |
| 155. | Micro-Coplanar Striplines-New Transmission Media for Microwave Applications |
| 156. | Microfabricated Chemical Sensors for Safety and Emission Control Applications |
| 157. | Micromechanical Prediction of the Effective Coefficients of Thermo-Piezoelectric Multiphase Composites |
| 158. | Microstructural, Chemical and Mechanical Characterization of Polymer-Derived Hi-Nicalon Fibers with Surface Coatings |
| 159. | Minnowbrook II 1997 Workshop on Boundary Layer Transition in Turbomachines |
| 160. | Model Engine Performance Measurement From Force Balance Instrumentation |
| 161. | Model-Based Fault Diagnosis for Turboshaft Engines |
| 162. | Modeling of Substitutional Site Preference in Ordered Intermetallic Alloys |
| 163. | Monte Carlo Computational Modeling of the Energy Dependence of Atomic Oxygen Undercutting of Protected Polymers |
| 164. | MPEG-2 Over Asynchronous Transfer Mode (ATM) Over Satellite Quality of Service (QoS) Experiments: Laboratory Tests |
| 165. | NASA Breakthrough Propulsion Physics Program |
| 166. | NASA/FAA/NCAR Supercooled Large Droplet Icing Flight Research: Summary of Winter 96-97 Flight Operations |
| 167. | Neural Network and Regression Approximations in High Speed Civil Transport Aircraft Design Optimization |
| 168. | Neural Network-Based Sensor Validation for Turboshaft Engines |
| 169. | Noncontact Acousto-Ultrasonics for Material Characterization |
| 170. | Nonlinear Comparison of High-Order and Optimized Finite-Difference Schemes |
| 171. | Nonlinear Control of a Reusable Rocket Engine for Life Extension |
| 172. | Nonlinear Interaction of Detuned Instability Waves in Boundary-Layer Transition Amplitude Equations |
| 173. | Nonlinear Interaction of Detuned Instability Waves in Boundary-Layer Transition Resonant-Triad Interaction |
| 174. | Numerical Investigation of Hot Gas Ingestion by STOVL Aircraft |
| 175. | Numerical Modeling of Solidification in Space With MEPHISTO-4 (Part 2) |
| 176. | OARE STS-87 (USMP-4) Final Report |
| 177. | OARE STS-94 (MSL-1R) Final Report |
| 178. | On the Environmental Realizability of Algebraically Growing Disturbances and Their Relation to Klebanoff Modes |
| 179. | On the Role of Anisotropy in Turbulent Mixing Noise |
| 180. | On-Board Propulsion System Analysis of High Density Propellants |
| 181. | On-Board Switching and Routing Advanced Technology Study |
| 182. | Operational Evaluation of a Health and Usage Monitoring System (HUMS) |
| 183. | Optical Channelizer Evaluation Using Empirical Data and Simulation |
| 184. | Optical Closed-Loop Propulsion Control System Development |
| 185. | Optical Property Enhancement and Durability Evaluation of Heat Receiver Aperture Shield Materials |
| 186. | Optimality of a Fully Stressed Design |
| 187. | PCEMCAN-Probabilistic Ceramic Matrix Composites Analyzer User's Guide, Version 1.0 |
| 188. | Performance Analysis of an Actor-Based Distributed Simulation |
| 189. | Performance of an Axisymmetric Rocket Based Combined Cycle Engine During Rocket Only Operation Using Linear Regression Analysis |
| 190. | Performance of Surface-Mount Ceramic and Solid Tantalum Capacitors for Cryogenic Applications |
| 191. | Performance of the Spacecraft Propulsion Research Facility During Altitude Firing Tests of the Delta III Upper Stage |
| 192. | Physical Mechanisms of Glaze Ice Scallop Formations on Swept Wings |
| 193. | Power, Propulsion, and Communications for Microspacecraft Missions |
| 194. | Preconditioning the Helmholtz Equation for Rigid Ducts |
| 195. | Preliminary Assessment of Using Gelled and Hybrid Propellant Propulsion for VTOL/SSTO Launch Systems |
| 196. | Preliminary Tuft Testing of Metallic Bristles Versus PS212, PS300, and HVOF300 |
| 197. | Probabilistic Modeling of Ceramic Matrix Composite Strength |
| 198. | Probabilistic Modeling of High-Temperature Material Properties of a 5-Harness 0/90 Sylramic Fiber/CVI-SiC/MI-SiC WovenComposite |
| 199. | Progress Toward Standards for the Seamless Interoperability of Broadband Satellite Communication Networks |
| 200. | Properties Data for Adhesion and Surface Chemistry of Aluminum: Sapphire-Aluminum, Single-Crystal Couple |
| 201. | Propulsion Options for Primary Thrust and Attitude Control of Microspacecraft |
| 202. | Propulsion System for Very High Altitude Subsonic Unmanner Aircraft |
| 203. | PSP Measurement of Stator Vane Surface Pressures in a High Speed Fan |
| 204. | Rayleigh Scattering Diagnostic for Measurement of Temperature and Velocity in Harsh Environments |
| 205. | Real-Time Sensor Validation, Signal Reconstruction, and Feature Detection for an RLV Propulsion Testbed |
| 206. | Reduced Perceived Noise for Low Tip Speed Fans as a Result of Abandoning Cutoff Stator Vane Numbers |
| 207. | Refraction of Sound Emitted Near Solid Boundaries From a Sheared Jet |
| 208. | Remote Heat Flux Measurement Using a Self Calibration Multiwavelength Pyrometer and a Transparent Material |
| 209. | Research & Technology 1997 |
| 210. | RHETT/EPDM Performance Characterization |
| 211. | SAMS Acceleration Measurements on Mir From January to May 1997 (NASA Increment 4) |
| 212. | Satellite Networks: Architectures, Applications, and Technologies |
| 213. | Scaling of Ion Thrusters to Low Power |
| 214. | Scaling up the Single Transducer Thickness-Independent Ultrasonic Imaging Method for Accurate Characterization of Microstructural Gradients in Monolithic and Composite Tubular Structures |
| 215. | Self Calibration of a 2-wavelength Pyrometer |
| 216. | Several Microstrip-Based Conductor/Thin Film Ferroelectric Phase Shifter Designs Using (YBa2Cu3O7-δ, Au)/SrTiO3/LaAlO3 Structures |
| 217. | Simulated Solar Flare X-Ray and Thermal Cycling Durability Evaluation of Hubble Space Telescope Thermal Control Candidate Replacement Materials |
| 218. | Simulation of Crack Propagation in Engine Rotating Components Under Variable Amplitude Loading |
| 219. | Sintering and Creep Behavior of Plasma-Sprayed Zirconia and Hafnia Based Thermal Barrier Coatings |
| 220. | Small Engine Technology (Set) Task 8 Aeroelastic Prediction Methods Final Report |
| 221. | Solid Lubrication Fundamentals and Applications Characterization of Solid Surfaces |
| 222. | Solid Lubrication Fundamentals and Applications Introduction and Background |
| 223. | Solid Lubrication Fundamentals and Applications Properties of Clean Surfaces: Adhesion, Friction, and Wear |
| 224. | Solid Lubrication Fundamentals and Applications Properties of Contaminated Surfaces: Adhesion, Friction, and Wear |
| 225. | Space Shuttle Pinhole Formation Mechanism Studies |
| 226. | Space Station Cathode Design, Performance, and Operating Specifications |
| 227. | Stability of Capillary Surfaces in Rectangular Containers: The Right Square Cylinder |
| 228. | Statistical Analysis of a Large Sample Size Pyroshock Test Data Set |
| 229. | Status and Design Concepts for the Hydrogen On-Orbit Storage and Supply Experiment |
| 230. | Structures and Mechanical Properties of Natural and Synthetic Diamonds |
| 231. | Study of a Wake Recovery Mechanism in a High-Speed Axial Compressor Stage |
| 232. | Study of Low Reynolds Number Effects on the Losses in Low-Pressure Turbine Blade Rows |
| 233. | Subsonic Flow Quality Surveys of the NASA Lewis Research Center 10- by 10-Foot Supersonic Wind Tunnel |
| 234. | Summary Report of Mission Acceleration Measurements for MSL-1 STS-83, Launched April 14, 1997 STS-94, Launched July 1, 1997 |
| 235. | Supersonic Coaxial Jets: Noise Predictions and Measurements |
| 236. | Surface and Interface Study of PdCr/SiC Schottky Diode Gas Sensor Annealed at 425 °C |
| 237. | Surface Chemistry, Microstructure, and Tribological Properties of Cubic Boron Nitride Films |
| 238. | Symbolic Computational Approach to the Marangoni Convection Problem With Soret Diffusion |
| 239. | Synchrotron VUV and Soft X-Ray Radiation Effects on Aluminized Teflon FEP |
| 240. | Technical Characteristics of a Novel Helical-Groove Traveling-Wave Tube Structure |
| 241. | Technology Directions for the 21st Century Volume IV |
| 242. | Tensile Properties and Microstructural Characterization of Hi-Nicalon SiC/RBSN Composites |
| 243. | The "CommTech" Methodology: A Demand-Driven Approach to Efficient, Productive and Measurable Technology Transfer |
| 244. | The Design of a Transparent Vertical Multizone Furnace: Application to Thermal Field Tuning and Crystal Growth |
| 245. | The Effect of Alloying on Topologically Close Packed Phase Instability in Advanced Nickel-Base Superalloy Rene N6 |
| 246. | The Evaluation of a Modified Chrome Oxide Based High Temperature Solid Lubricant Coating for Foil Gas Bearings |
| 247. | The High Stability Engine Control (HISTEC) Program: Flight Demonstration Phase |
| 248. | The Improvement of Ion Plated Ag and Au Film Adherence to Si3N4 and SiC Surfaces for Increased Tribological Performance |
| 249. | The Role of Multiphysics Simulation in Multidisciplinary Analysis |
| 250. | The Space-Time Conservation Element and Solution Element Method-A New High-Resolution and Genuinely Multidimensional Paradigm for Solving Conservation Laws I. The Two-Dimensional Time Marching Schemes |
| 251. | The Space-Time Conservation Element and Solution Element Method-A New High-Resolution and Genuinely Multidimensional Paradigm for Solving Conservation Laws II. Numerical Simulation of Shock Waves and Contact Discontinuities |
| 252. | The Three-Dimensional Flow Field at the Exit of an Axial-Flow Turbine Rotor |
| 253. | Theoretical and Experimental Determination of the Proton Affinity of (CF3CH2)2O |
| 254. | Thermal and Mechanical Durability of Graphite-Fiber-Reinforced PMR-15 Composites |
| 255. | Thermal Barrier Coating Workshop, 1997 |
| 256. | Thermal State-of-Charge in Solar Heat Receivers |
| 257. | Thermomechanical Fatigue Durability of T650-35/PMR-15 Sheet Molding Compound |
| 258. | Thermophotovoltaic Energy Conversion Development Program |
| 259. | Thickness-Independent Ultrasonic Imaging Applied to Abrasive Cut-Off Wheels: An Advanced Aerospace Materials Characterization Method for the Abrasives Industry: A NASA Lewis Research Center Technology Transfer Case History |
| 260. | Three-Dimensional Gear Crack Propagation Studies |
| 261. | TMC Behavior Modeling and Life Prediction Under Multiaxial Stresses |
| 262. | To Err is Normable: The Computation of Frequency-Domain Error Bounds From Time-Domain Data |
| 263. | Tone Noise and Nearfield Pressure Produced by Jet-Cavity Interaction |
| 264. | Transmission and Incidence Losses for a Slotted Plate |
| 265. | Tunable Microwave Components for Ku- and K-Band Satellite Communications |
| 266. | Turbulent Radiation Effects in HSCT Combustor Rich Zone |
| 267. | User Manual for Beta Version of TURBO-GRD: 2A Software System for Interactive Two-Dimensional Boundary/Field Grid Generation, Modification, and Refinement |
| 268. | Using Computers in Fluids Engineering Education |
| 269. | Using Dynamic Analysis for Compact Gear Design |
| 270. | Using Neural Networks for Sensor Validation |
| 271. | Verification of Space Station Secondary Power System Stability Using Design of Experiment |
| 272. | Virtual and Experimental Visualization of Flows in Packed Beds of Spheres Simulating Porous Media Flows |
| 273. | Visual Computing Environment Workshop |
| 274. | Vortex/Body Interaction and Sound Generation in Low-Speed Flow |
| 275. | Wave Augmented Diffusers for Centrifugal Compressors |
| 276. | Wave Turbine Analysis Tool Development |
| 277. | Workshop on Research for Space Exploration: Physical Sciences and Process Technology |