| 1. | 10000-Hour Cyclic Oxidation Behavior at 982 °C (1800 °F) of 68 High-Temperature Co-, Fe-, and Ni-Base Alloys |
| 2. | 2 kWe Solar Dynamic Ground Test Demonstration Project: Volume II: Design Report |
| 3. | 28,000 Hour Xenon Hollow Cathode Life Test Results |
| 4. | A General Reversible Hereditary Constitutive Model: Part II-Application to a Titanium Alloy |
| 5. | A General Reversible Hereditary Constitutive Model: Part I-Theoretical Developments |
| 6. | A Method for Generating Reduced Order Linear Models of Supersonic Inlets |
| 7. | A New Foil Air Bearing Test Rig for Use to 700 °C and 70,000 rpm |
| 8. | A Performance Comparison of Pulsed Plasma Thruster Electrode Configurations |
| 9. | A Quantitative Review of ACTS Experiments Operations |
| 10. | A Rocket Engine for Mars Sample Return Using In Situ Propellants |
| 11. | A Study of Large Droplet Ice Accretion in the NASA Lewis IRT at Near-Freezing Conditions; Part 2 |
| 12. | A Three-Dimensional Linearized Unsteady Euler Analysis for Turbomachinery Blade Rows |
| 13. | A. Palmgren Revisited-A Basis for Bearing Life Prediction |
| 14. | Accurate Monotonicity-Preserving Schemes With Runge-Kutta Time Stepping |
| 15. | Achromatic Emission Velocity Measurements in Luminous Flows |
| 16. | Acoustic Testing of the Cassini Spacecraft and Titan IV Payload Fairing Part 1-Introduction and Test Configuration |
| 17. | Acoustic Testing of the Cassini Spacecraft and Titan IV Payload Fairing Part 2-Results |
| 18. | Adaptive Performance Seeking Control Using Fuzzy Model Reference Learning Control and Positive Gradient Control |
| 19. | Advanced Low-Noise Research Fan Stage Design |
| 20. | Advances in Thin Film Sensor Technologies for Engine Applications |
| 21. | Aerodynamic Synthesis of a Centrifugal Impeller Using CFD and Measurements |
| 22. | An Acceleration Measurement Capability on International Space Station Supporting Microgravity Science Payloads |
| 23. | An Assessment of Smallsat Technology to Future Exploration Missions |
| 24. | An Efficient Implementation of the GMC Micromechanics Model for Multi-Phased Materials With Complex Microstructures |
| 25. | An Experiment on Losses in a Three-Port Wave Rotor |
| 26. | An Experimental Investigation of Steady and Unsteady Flow Field in an Axial Flow Turbine |
| 27. | An Experimental Study of Swirling Flows as Applied to Annular Combustors |
| 28. | An Experimental Study of the Effect of Wake Passing on Turbine Blade Film Cooling |
| 29. | An Experimental Study of the Near Field Region of a Free Jet With Passive Mixing Tabs |
| 30. | An Overview of Three Approaches to Multidisciplinary Aeropropulsion Simulations |
| 31. | Application of Chimera Grid Scheme to Combustor Flowfields at all Speeds |
| 32. | Application of Low Dimensional Manifolds in NOx Prediction |
| 33. | ATM Quality of Service Parameters at 45 Mbps Using a Satellite Emulator: Laboratory Measurements |
| 34. | ATM Quality of Service Tests for Digitized Video Using ATM Over Satellite: Laboratory Tests |
| 35. | Atomic Oxygen Exposure of Power System and Other Spacecraft Materials: Results of the EOIM-3 Experiment |
| 36. | Atomic Oxygen Texturing of Polymers and Carbons |
| 37. | Atomic Oxygen Treatment Technique for Removal of Smoke Damage From Paintings |
| 38. | Atomistic Simulations and Experimental Analysis of the Effect of Ti Additions on the Structure of NiAl |
| 39. | Atomistic Simulations of Ti and Cr Alloying Additions to NiAl Using the BFS Method |
| 40. | Attachment of Free Filament Thermocouples for Temperature Measurements on CMC |
| 41. | Automated Simplification of Full Chemical Mechanisms |
| 42. | Automotive Gas Turbine Power System-Performance Analysis Code |
| 43. | Automotive Stirling Engine Development Project |
| 44. | Azimuthal Directivity of Fan Tones Containing Multiple Modes |
| 45. | Benefits of Low-Power Electrothermal Propulsion |
| 46. | Bidirectional Brush Seals |
| 47. | Bidirectional Brush Seals-Post-test Analysis |
| 48. | Blockage Development in a Transonic, Axial Compressor Rotor |
| 49. | Breakthrough Propulsion Physics Workshop Preliminary Results |
| 50. | Burst Mode ASIC-Based Modem |
| 51. | Calibration of the NASA Lewis Research Center 9- by 15-Foot Low Speed Wind Tunnel (1994 Test) |
| 52. | Changing the Landscape of Civil Aviation |
| 53. | Characteristics of Residual Mixing Noise From Internal Fan/Core Mixers |
| 54. | Characterization and Demonstrations of Laser-Induced Incandescence in Both Normal and Low-Gravity |
| 55. | Characterization of Ice Roughness From Simulated Icing Encounters |
| 56. | Characterization of Miniature Millimeter-Wave Vivaldi Antenna for Local Multipoint Distribution Service |
| 57. | Chemical Gas Sensors for Aeronautic and Space Applications |
| 58. | Collection Efficiency and Ice Accretion Calculations for a Boeing 737-300 Inlet |
| 59. | Collective Interaction of a Compressible Periodic Parallel Jet Flow |
| 60. | Combustion Noise at Elevated Pressures in a Liquid-Fueled Premixed Combustor |
| 61. | Comparison of High Aspect Ratio Cooling Channel Designs for a Rocket Combustion Chamber |
| 62. | Comparison Tools for Assessing the Microgravity Environment of Missions, Carriers and Conditions |
| 63. | Composite Matrix Regenerator for Stirling Engines |
| 64. | Computerized Simulation of Meshing of Conventional Helical Involute Gears and Modification of Geometry |
| 65. | Coordinates for a High Performance 4:1 Pressure Ratio Centrifugal Compressor |
| 66. | Creep and Rupture Strength of an Advanced CVD SiC Fiber |
| 67. | Design and Analysis of the Aperture Shield Assembly for a Space Solar Receiver |
| 68. | Design and Fabrication of a Dielectric Total Internal Reflecting Solar Concentrator and Associated Flux Extractor for Extreme High Temperature (2500K) Applications |
| 69. | Design of the NASA Lewis 4-Port Wave Rotor Experiment |
| 70. | Designing for Maintainability and System Availability |
| 71. | Determination of Creep Behavior of Thermal Barrier Coatings Under Laser Imposed Temperature and Stress Gradients |
| 72. | Determination of Shed Ice Particle Size Using High Speed Digital Imaging |
| 73. | Development of a 1 kW, 200 °C Mapham Inverter Utilizing High Temperature Components |
| 74. | Development of a Device to Deploy Fluid Droplets in Microgravity |
| 75. | Development of an Ion Thruster and Power Processor for New Millennium's Deep Space 1 Mission |
| 76. | Development of Gear Technology and Theory of Gearing |
| 77. | Development of High Temperature Gas Sensor Technology |
| 78. | Diagnostic Analyzer for Gearboxes (DAG): User's Guide Version 3.1 for Microsoft Windows 3.1 |
| 79. | Direct Data Distribution From Low-Earth Orbit |
| 80. | DRA/NASA/ONERA Collaboration on Icing Research: Part II-Prediction of Airfoil Ice Accretion |
| 81. | Dynamic Analysis With Stress Mode Animation by the Integrated Force Method |
| 82. | Dynamic Simulation of a Wave Rotor Topped Turboshaft Engine |
| 83. | Effect of Coannular Flow on Linearized Euler Equation Predictions of Jet Noise |
| 84. | Effect of Date and Location on Maximum Achievable Altitude for a Solar Powered Aircraft |
| 85. | Effect of Flow Misalignment and Multi-Hole Interaction on Boundary-Layer Bleed Hole Flow Coefficient Behavior |
| 86. | Effect of Intercalation in Graphite Epoxy Composites on the Shielding of High Energy Radiation |
| 87. | Effect of Temperature Gradient on Thick Film Selective Emitter Emittance |
| 88. | Effects of Acoustically Lined Cylindrical Ducts on Instability Waves in Confined Supersonic Jets |
| 89. | Effects of Compression, Staging, and Braid Angle on Braided Rope Seal Performance |
| 90. | Effects of Experiment Location and Orbiter Attitude on the Residual Acceleration On-Board STS-73 (USML-2) |
| 91. | Effects of Fiber Coatings on Tensile Properties of Hi-Nicalon SiC/RBSN Tow Composites |
| 92. | Effects of Interface Modification on Mechanical Behavior of Hi-Nicalon Fiber-Reinforced Celsian Matrix Composites |
| 93. | Effects of Neutral Density on Energetic Ions Produced Near High-Current Hollow Cathodes |
| 94. | Effects of Stator Indexing on Performance in a Low Speed Multistage Axial Compressor |
| 95. | Ejector Noise Suppression With Auxiliary Jet Injection |
| 96. | Electric Arc and Electrochemical Surface Texturing Technologies |
| 97. | Electrical and Optical Performance Characteristics of p/n InGaAs Monolithic Intereconnected Modules |
| 98. | Electrodeposited CuInSe2 Thin Film Junctions |
| 99. | Electrolysis Propulsion for Spacecraft Applications |
| 100. | Elevated Temperature Ballistic Impact Testing of PBO and Kevlar Fabrics for Application in Supersonic Jet Engine Fan Containment Systems |
| 101. | Enhancing End-to-End Performance of Information Services Over Ka-Band Global Satellite Networks |
| 102. | Estimation of Slow Crack Growth Parameters for Constant Stress-Rate Test Data of Advanced Ceramics and Glass by the Individual Data and Arithmetic Mean Methods |
| 103. | Evaluation of a High-Accuracy MacCormack-Type Scheme Using Benchmark Problems |
| 104. | Evaluation of an Ejector Ramjet Based Propulsion System for Air-Breathing Hypersonic Flight |
| 105. | Evaluation of Heat Transfer and Thermal Stability of Supercritical JP-7 Fuel |
| 106. | Experimental Assessment and Enhancement of Planar Laser-Induced Fluorescence Measurements of Nitric Oxide in an Inverse Diffusion Flame |
| 107. | Experimental Characterization and Micromechanical Modeling of Woven Carbon/Copper Composites |
| 108. | Experimental Data for Two Different Alternator Configurations in a Solar Brayton Power System |
| 109. | Experimental Evaluation of the Penalty Associated With Micro-Blowing for Reducing Skin Friction |
| 110. | Experimental Investigation of Unsteady Shock Wave Turbulent Boundary Layer Interactions About a Blunt Fin |
| 111. | Experimental Visualization of Flows in Packed Beds of Spheres |
| 112. | Factors Influencing Pitot Probe Centerline Displacement in a Turbulent Supersonic Boundary Layer |
| 113. | Fan Noise Prediction: Status and Needs |
| 114. | Fatigue Reliability of Gas Turbine Engine Structures |
| 115. | Fault Analysis of Space Station DC Power Systems-Using Neural Network Adaptive Wavelets to Detect Faults |
| 116. | Feasibility of NASA TT&C via Commercial Satellite Services |
| 117. | Feasibility Study of Optically Transparent Microstrip Patch Antenna |
| 118. | Fiber Finishes for Improving Interfacial Thermo-Oxidative Stability in PMR-II-50 Matrix Composites |
| 119. | Fiber-Optic Temperature Sensor Using a Thin-Film Fabry-Perot Interferometer |
| 120. | Fixing Two BSD TCP Bugs |
| 121. | Flow Analysis of the Cleveland Clinic Centrifugul Pump |
| 122. | Fourth International Microgravity Combustion Workshop |
| 123. | Frictionless Contact of Multilayered Composite Half Planes Containing Layers With Complex Eigenvalues |
| 124. | Gear and Transmission Research at NASA Lewis Research Center |
| 125. | HAN-Based Monopropellant Propulsion System With Applications |
| 126. | HBCUs Research Conference Agenda and Abstracts |
| 127. | Heat Transfer Computations of Internal Duct Flows With Combined Hydraulic and Thermal Developing Length |
| 128. | Hierarchical Parallelism in Finite Difference Analysis of Heat Conduction |
| 129. | High Accuracy Temperature Measurements Using RTD's With Current Loop Conditioning |
| 130. | High Pressure, Earth-Storable Rocket Technology: Volume 1 |
| 131. | High Pressure, Earth-Storable Rocket Technology : Volume 2-Appendices A and B |
| 132. | High Pressure, Earth-Storable Rocket Technology : Volume 3-Appendices C and D |
| 133. | High Temperature Brush Seal Tuft Testing of Selected Nickel-Chrome and Cobalt-Chrome Superalloys |
| 134. | High Temperature Transparent Furnace Development |
| 135. | High-Flux, High-Temperature Thermal Vacuum Qualification Testing of a Solar Receiver Aperture Shield |
| 136. | Hot Fire Ignition Test With Densified Liquid Hydrogen Using a RL10B-2 Cryogenic H2/O2 Rocket Engine |
| 137. | Imaging Fluorescent Combustion Species in Gas Turbine Flame Tubes: On Complexities in Real Systems |
| 138. | Impact of Periodic Unsteadiness on Performance and Heat Load in Axial Flow Turbomachines |
| 139. | Improved Optical Techniques for Studying Sonic and Supersonic Injection Into Mach 3 Flow |
| 140. | Improvements in Block-Krylov Ritz Vectors and the Boundary Flexibility Method of Component Synthesis |
| 141. | Improving the Performance of the Structure-Based Connectionist Network for Diagnosis of Helicopter Gearboxes |
| 142. | Insoluble Coatings for Stirling Engine Heat Pipe Condenser Surfaces Phase II: Final Report |
| 143. | Institute for Computational Mechanics in Propulsion (ICOMP) Eleventh Annual Report-1996 |
| 144. | Integrated Thin Film Fluorescence NOx Sensor: Concept |
| 145. | International Space Station Cathode Life Testing |
| 146. | Investigation of Teflon FEP Embrittlement on Spacecraft in Low Earth Orbit |
| 147. | IPAC - Inlet Performance Analysis Code |
| 148. | Iridium-Coated Rhenium Radiation-Cooled Rockets |
| 149. | Joint US/Russia TU-144 Engine Ground Tests |
| 150. | JTAGG II Brush Seal Test Results |
| 151. | Ka-Band GaAs FET Monolithic Power Amplifier Development |
| 152. | Laser Anemometer Measurements of the Flow Field in a 4:1 Pressure Ratio Centrifugal Impeller |
| 153. | Laser Beam Propagation Through Inhomogeneous Media With Shock-Like Profiles: Modeling and Computing |
| 154. | Laser-Induced Incandescence in Microgravity |
| 155. | Laser-Induced Incandescence to Measure Soot/Smoke Concentrations |
| 156. | Locating the Discontinuities of a Bounded Function by the Partial Sums of its Fourier Series I: Periodical Case |
| 157. | Long Term Performance of a Retainerless Bearing Cartridge with an Oozing Flow Lubricator for Spacecraft Applications |
| 158. | Low Cost Manufacturing Approach of High Temperature PMC Components |
| 159. | Low Speed Calibration of the NASA Lewis Research Center 8- by 6-Foot Supersonic Wind Tunnel (1995 Test) |
| 160. | Low-Power Ion Propulsion for Small Spacecraft |
| 161. | LSPRAY-A Lagrangian Spray Solver-User's Manual |
| 162. | Lubrication by Diamond and Diamondlike Carbon Coatings |
| 163. | Machine Dynamics Branch Research and Accomplishments for FY 1996 |
| 164. | Mars Pathfinder Rover-Lewis Research Center Technology Experiments Program |
| 165. | Mechanical System Reliability and Cost Integration Using a Sequential Linear Approximation Method |
| 166. | Metallized Gelled Propellants: Oxygen/RP-1/Aluminum Rocket Engine Calorimeter Heat Transfer Measurements and Analysis |
| 167. | Microfabricated Ice-Detection Sensor |
| 168. | Microgravity Environment Description Handbook |
| 169. | Micromechanical Modeling of the Finite Deformation of Thermoelastic Multiphase Composites |
| 170. | Micromechanical Modeling of Woven Metal Matrix Composites |
| 171. | Mir Cooperative Solar Array Flight Performance Data and Computational Analysis |
| 172. | Mixing of Multiple Jets With a Confined Subsonic Crossflow Part II-Opposed Rows of Orifices in Rectangular Ducts |
| 173. | Mixing of Pure Air Jets With a Reacting Fuel-Rich Crossflow |
| 174. | MMIC Package for Millimeter Wave Frequency |
| 175. | Modeling Cyclic Phase Change and Energy Storage in Solar Heat Receivers |
| 176. | Modern Airfoil Ice Accretions |
| 177. | Modified Fully Utilized Design (MFUD) Method for Stress and Displacement Constraints |
| 178. | MS212-A Homogeneous Sputtered Solid Lubricant Coating for Use to 800 °C |
| 179. | NASA's Involvement in Technology Development and Transfer: The Ohio Hybrid Bus Project |
| 180. | New Methods for Improved Double Circular-Arc Helical Gears |
| 181. | Noise Reduction With Lobed Mixers: Nozzle-Length and Free-Jet Speed Effects |
| 182. | Nonlinear Performance Seeking Control Using Fuzzy Model Reference Learning Control and the Method of Steepest Descent |
| 183. | NPAC - Nozzle Performance Analysis Code |
| 184. | Numerical Assessment of Four-Port Through-Flow Wave Rotor Cycles With Passage Height Variation |
| 185. | Numerical Flow Visualization in Basic- and Hyper-Cluster Spheres |
| 186. | Numerical Simulation of a Low Emissions Gas Turbine Combustor Using KIVA-II: Part II: Quick-Quench/Lean-Combustion Zones Analysis |
| 187. | Numerical Simulation of a Low Emissions Gas Turbine Combustor Using KIVA-II : Part I: Fuel Nozzle/Rich-Burn Zone Analysis |
| 188. | Numerical Simulation of the Effect of Heating on Supersonic Jet Noise |
| 189. | Numerical Study of Stratified Charge Combustion in Wave Rotors |
| 190. | OMC Compressor Case |
| 191. | Operational Characteristics of the SPT-140 Hall Thruster |
| 192. | Optimization of Jet Mixing Into a Rich, Reacting Crossflow |
| 193. | Parallel ALLSPD-3D: Speeding Up Combustor Analysis Via Parallel Processing |
| 194. | Parametric Analysis of Cyclic Phase Change and Energy Storage in Solar Heat Receivers |
| 195. | Passage-Averaged Description of Wave Rotor Flow |
| 196. | Performance Evaluation of the SPT-140 |
| 197. | Performance Tests of a Liquid Hydrogen Propellant Densification Ground Support System for the X33/RLV |
| 198. | Photodetector Development for the Wheel Abrasion Experiment on the Sojourner Microrover of the Mars Pathfinder Mission |
| 199. | Physics & Process Modeling (PPM) and Other Propulsion R&T Volume II: Applied Life Models, Design, Vibration Control, Mechanical Components, Tribology |
| 200. | PIV for Turbomachinery Applications |
| 201. | Potential New Sensor for Use With Conventional Gas Carburizing |
| 202. | Power Electronics for a Miniaturized Arcjet |
| 203. | Pre-Flight Dark Forward Electrical Testing of the Mir Cooperative Solar Array |
| 204. | Probabilistic Mesomechanical Fatigue Model |
| 205. | Probabilistic Micromechanics/Macromechanics for Ceramic Matrix Composites |
| 206. | Progress in the Modeling of NiAl-Based Alloys Using the BFS Method |
| 207. | Progress Toward Meeting the Propulsion Technology Challenges for a 21st Century High-Speed Civil Transport |
| 208. | Propellant Technologies: A Persuasive Wave of Future Propulsion Benefits |
| 209. | Providing Total Quality Fundamentals: 1995 Workshops for the NASA Lewis Research Center's Technical Services Directorate |
| 210. | PSIDD (II): A Prototype Post-Scan Interactive Data Display System for Detailed Analysis of Ultrasonic Scans |
| 211. | Rain Fade Compensation Alternatives for Ka Band Communication Satellites |
| 212. | Rain Fade Compensation for Ka-Band Communications Satellites |
| 213. | Recent Advances in the Analysis of Spiral Bevel Gears |
| 214. | Requirements and Development of an Acceleration Measurement System for International Space Station Microgravity Science Payloads |
| 215. | Research & Technology 1996 |
| 216. | RHETT/EPDM Flight Hollow Cathode |
| 217. | RHETT2/EPDM Hall Thruster Propulsion System Electromagnetic Compatibility Evaluation |
| 218. | RL10A-3-3A Rocket Engine Modeling Project |
| 219. | Rotordynamic Instability Problems in High-Performance Turbomachinery 1996 |
| 220. | Sample Mission Application of Capacitor Powered Hall Thrusters |
| 221. | SAMS Acceleration Measurements on Mir From November 1995 to March 1996 |
| 222. | SAMS Acceleration Measurements on MIR From September 1996 to January 1997 |
| 223. | SiC Recession Due to SiO2 Scale Volatility Under Combustor Conditions |
| 224. | SiC-Based Gas Sensors |
| 225. | Small Engine Technology Task 4: Advanced Small Turboshaft Compressor (ASTC) Performance and Range Investigation |
| 226. | Software Design Improvements Part 1: Software Benefits and Limitations |
| 227. | Solar Cell Calibration and Measurement Techniques |
| 228. | Space Station Cathode Ignition Test Status at 32,000 Cycles |
| 229. | Speed Sensorless Induction Motor Drives for Electrical Actuators: Schemes, Trends and Tradeoffs |
| 230. | Strategy for Developing Expert-System-Based Internet Protocols (TCP/IP) |
| 231. | Stressed Oxidation of C/SiC Composites |
| 232. | Strong and Tough Hi-Nicalon Fiber-Rienforced Celsian Matrix Composites |
| 233. | Strong, Tough, and Pest Resistant MoSi2-Base Hybrid Composite for Structural Applications |
| 234. | Structures Division 1995 Annual Report |
| 235. | Study of CFD Methods Applied to Rapidly Deforming Boundaries |
| 236. | Study of Injection of Helium Into Supersonic Air Flow Using Rayleigh Scattering |
| 237. | Sulfur Impurities and the Microstructure of Alumina Scales |
| 238. | Summary Report of Mission Acceleration Measurements for STS-78 Launched June 20, 1996 |
| 239. | Summary Report of Mission Acceleration Measurements for STS-79 Launched September 16, 1996 |
| 240. | Synthesis and Thermal Stability of Graphite Oxide-Like Materials |
| 241. | System Design and Applications of the Ultra Small Aperture Terminal With the Advanced Communications Technology Satellite |
| 242. | System-Level Integrated Circuit (SLIC) Technology Development for Phased Array Antenna Applications |
| 243. | Temperature Measurement of a Glass Material Using a Multiwavelength Pyrometer |
| 244. | Test Method to Evaluate Cylinder Liner-Piston Ring Coatings for Advanced Heat Engines |
| 245. | Test Procedures for Characterizing, Evaluating, and Managing Separator Materials Used in Secondary Alkaline Batteries |
| 246. | Testing of Wrought Iridium/Chemical Vapor Deposition Rhenium Rocket |
| 247. | Tests of the Performance of Coatings for Low Ice Adhesion |
| 248. | The Development of a PdCr Integral Weldable Strain Measurement System Based on NASA Lewis PdCr/Pt Strain Sensor for User-Friendly Elevated Temperature Strain Measurements |
| 249. | The Effect of Area Variation on Wave Rotor Elements |
| 250. | The Effect of Cooling Passage Aspect Ratio on Curvature Heat Transfer Enhancement |
| 251. | The Effect of Temperature Dependent Material Nonlinearities on the Response of Piezoelectric Composite Plates |
| 252. | The Effects of Acid Passivation, Tricresyl Phosphate Pre-Soak, and UV/Ozone Treatment on the Tribology of Perfluoropolyether-Lubricated 440 °C Stainless Steel Couples |
| 253. | The Effects of Magnetic Nozzle Configurations on Plasma Thrusters |
| 254. | The Efficiency of the Smoke Meter at Characterizing Engine Emissions |
| 255. | The Implicit and Explicit a-m Schemes |
| 256. | The Microgravity Vibration Isolation Mount: A Dynamic Model for Optimal Controller Design |
| 257. | The NASA Lewis Research Center Water Tunnel Facility |
| 258. | Thermal and Mechanical Durability of Graphite-Fiber-Reinforced PMR-15 Composites |
| 259. | Thermal Cycling of Mir Cooperative Solar Array (MCSA) Test Panels |
| 260. | Thermal Fatigue Testing of ZrO2-Y2O3 Thermal Barrier Coating Systems Using a High Power CO2 Laser |
| 261. | Thermal Stability of Jet Fuels: Kinetics of Forming Deposit Precursors |
| 262. | Thermomechanical Behavior of Advanced SiC Fiber Multifilament Tows |
| 263. | Thin Film Multilayer Conductor/Ferroelectric Tunable Microwave Components for Communication Applications |
| 264. | Three Dimensional Viscous Flow Field in an Axial Flow Turbine Nozzle Passage |
| 265. | Time/Temperature Dependent Tensile Strength of SiC and Al2O3-Based Fibers |
| 266. | Training Manual for Elements of Interface Definition and Control |
| 267. | Ultra Small Aperture Terminal for Ka-Band SATCOM |
| 268. | Ultra-Capacitor Energy Storage in a Large Hybrid Electric Bus |
| 269. | User's Manual for DuctE3D: A Program for 3D Euler Unsteady Aerodynamic and Aeroelastic Analysis of Ducted Fans |
| 270. | Validation of an Accurate Three-Dimensional Helical Slow-Wave Circuit Model |
| 271. | Vented Tank Resupply Experiment-Flight Test Results |
| 272. | Vibrational Analysis of Engine Components Using Neural-Net Processing and Electronic Holography |
| 273. | Wave Number Selection for Incompressible Parallel Jet Flows Periodic in Space |
| 274. | Wind Tunnel Measured Effects on a Twin-Engine Short-Haul Transport Caused by Simulated Ice Accretions Data Report |