| 1. | 1994 Fiber Optic Sensors for Aerospace Technology (FOSAT) Workshop |
| 2. | 2.3 kW Ion Thruster Wear Test |
| 3. | 3D Navier-Stokes Analysis of a Mach 2.68 Bifurcated Rectangular Mixed-Compression Inlet |
| 4. | 77 K Operation of a Multi-Resonant Power Converter |
| 5. | A 75 Watt, 59 to 64 GHz Space TWT |
| 6. | A Combined Geometric Approach for Solving the Navier-Stokes Equations on Dynamic Grids |
| 7. | A Compact Fiber Optic Eye Diagnostic System |
| 8. | A Compact Fiber Optic Eye Diagnostics System |
| 9. | A Comparison of Multivariable Control Design Techniques for a Turbofan Engine Control |
| 10. | A Coupled Layerwise Analysis of the Thermopiezoelectric Response of Smart Composite Beams |
| 11. | A Fully Associative, Nonisothermal, Nonlinear Kinematic, Unified Viscoplastic Model for Titanium Alloys |
| 12. | A Heated Tube Facility for Rocket Coolant Channel Research |
| 13. | A Hydrogen Leak Detection System for Aerospace and Commercial Applications |
| 14. | A k-w Turbulence Model for Quasi-Three-Dimensional Turbomachinery Flows |
| 15. | A Method for Exploiting Redundancy to Accommodate Actuator Limits in Multivariable Systems |
| 16. | A New Antiwear Additive/Surface Pretreatment for PFPE Liquid Lubricants |
| 17. | A New Cu-8 Cr-4 Nb Alloy for High Temperature Applications |
| 18. | A Numerical Model for Dynamic Wave Rotor Analysis |
| 19. | A Numerical Study of the Effect of Wake Passing on Turbine Blade Film Cooling |
| 20. | A Phase-Stepped Point Diffraction Interferometer Using Liquid Crystals |
| 21. | A Review of Nickel Hydrogen Battery Technology |
| 22. | A Simulation Technique for Predicting Thickness of Thermal Sprayed Coatings |
| 23. | A Summary of the Slush Hydrogen Technology Program for the National Aero-Space Plane |
| 24. | A System Simulation Development Project: Leveraging Resources Through Partnerships |
| 25. | A Unique, Optically Accessible Flame Tube Facility for Lean Combustor Studies |
| 26. | A Zonal Approach for Prediction of Jet Noise |
| 27. | Ablative Material Testing for Low-Pressure, Low-Cost Rocket Engines |
| 28. | Acousto-Ultrasonic Decay in Metal Matrix Composite Panels |
| 29. | Actively Controlled Shaft Seals for Aerospace Applications |
| 30. | ACTS On-Orbit Multibeam Antenna Pattern Measurements |
| 31. | Adaptive Graphical User Interface Framework for Object-Oriented System Simulations |
| 32. | Additional Improvements to the NASA Lewis Ice Accretion Code LEWICE |
| 33. | Adhesion, Friction, and Wear Behavior of Clean Metal-Ceramic Couples |
| 34. | Advanced Communications Technology Satellite (ACTS): Design and On-orbit Performance Measurements |
| 35. | Advanced k-epsilon Modeling of Heat Transfer |
| 36. | Aerodynamic Evaluation of Two Compact Radial-Inflow Turbine Rotors |
| 37. | An Accelerated Development, Reduced Cost Approach to Lunar/Mars Exploration Using a Modular NTR-Based Space Transportation System |
| 38. | An Active Homopolar Magnetic Bearing With High Temperature Superconductor Coils and Ferromagnetic Cores |
| 39. | An Active Magnetic Bearing With High Tc Superconducting Coils and Ferromagnetic Cores |
| 40. | An Analytic Approximation to Very High Specific Impulse and Specific Power Interplanetary Space Mission Analysis |
| 41. | An Approach to the Development of Numerical Algorithms for First Order Linear Hyperbolic Systems in Multiple Space Dimensions: The Constant Coefficient Case |
| 42. | An Axial-Torsional, Thermomechanical Fatigue Testing Technique |
| 43. | An Experimental and Analytical Investigation of Stirling Space Power Converter Heater Head |
| 44. | An Integration of the Turbojet and Single-Throat Ramjet |
| 45. | An Open Simulation System Model for Scientific Applications |
| 46. | An Optimized Integrator Windup Protection Technique Applied to a Turbofan Engine Control |
| 47. | An Outflow Boundary Condition for Aeroacoustic Computations |
| 48. | An X-Band Mixer Engineered for 77-K Operation |
| 49. | Analysis of Shadowing Effects on MIR Photovoltaic and Solar Dynamic Power Systems |
| 50. | Analysis of Shadowing Effects on Spacecraft Power Systems |
| 51. | Analysis of Solar Receiver Flux Distributions for US/Russian Solar Dynamic System Demonstration on the MIR Space Station |
| 52. | Analysis of the Defect Structure of B2 FeAl Alloys |
| 53. | Analysis of the Progressive Failure of Brittle Matrix Composites |
| 54. | Application of Pressure Sensitive Paint in Hypersonic Flows |
| 55. | Application of the Space-Time Conservation Element and Solution Element Method to Two-Dimensional Advection-Diffusion Problems |
| 56. | Application of Thin-Film Thermocouples to Localized Heat Transfer Measurements |
| 57. | Applications Catalog of Pyrotechnically Actuated Devices/Systems |
| 58. | Atomic Oxygen Durability Evaluation of Protected Polymers Using Thermal Energy Plasma Systems |
| 59. | Atomic Oxygen Textured Polymers |
| 60. | Au/Cr Sputter Coating for the Protection of Alumina During Sliding at High Temperatures |
| 61. | Automatic Radiated Susceptibility Test System for Payload Equipment |
| 62. | Axisymmetric Inlet Minimum Weight Design Method |
| 63. | Bending Strength Model for Internal Spur Gear Teeth |
| 64. | Broadband Uniplanar Microstrip to Slot-Line Transitions |
| 65. | Bulk Properties of Ni3Al(g ') With Cu and Au Additions |
| 66. | Calculated Coupling Efficiency Between an Elliptical-Core Optical Fiber and a Silicon Oxynitride Rib Waveguide |
| 67. | Calculated Coupling Efficiency Between an Elliptical-Core Optical Fiber and an Optical Waveguide Over Temperature |
| 68. | Calculation of Kinetic Rate Constants From Thermodynamic Data |
| 69. | Challenges in Aeropropulsion |
| 70. | Characterization of Cobalt-Dipped Nickel Electrodes With Fibrex Substrates |
| 71. | Characterization of the Transport Properties of Channel Delta-Doped Structures by Light-Modulated Shubnikov-de Haas Measurements |
| 72. | Collection Efficiency and Ice Accretion Calculations for a Sphere, a Swept MS(1)-317 Wing, a Swept NACA-0012 Wing Tip, an Axisymmetric Inlet, and a Boeing 737-300 Inlet |
| 73. | Combining Comparison Functions and Finite Element Approximations in CFD |
| 74. | Completed Beltrami-Michell Formulation for Analyzing Mixed Boundary Value Problems in Elasticity |
| 75. | Composite Heat Pipe Development Status: Development of Lightweight Prototype Carbon-Carbon Heat Pipe With Integral Fins and Metal Foil Liner |
| 76. | Computational Study of Flow Establishment in a Ram Accelerator |
| 77. | Computerized Design and Generation of Low-Noise Gears With Localized Bearing Contact |
| 78. | Controls Concepts for Next Generation Reuseable Rocket Engines |
| 79. | Convective Heat Transfer From Castings of Ice Roughened Surfaces in Horizontal Flight |
| 80. | Correction Factor for Determining the London Penetration Depth from Strip Resonators |
| 81. | Crossflow Mixing of Noncircular Jets |
| 82. | Cryogenic and Simulated Fuel Jet Breakup in Argon, Helium and Nitrogen Gasflows |
| 83. | CVD Silicon Carbide Monofilament Reinforced SrO-Al2O3-2SiO2 (SAS) Glass-Ceramic Composites |
| 84. | Damage-Mitigating Control of a Reusable Rocket Engine for High Performance and Extended Life |
| 85. | Demonstration of a Stabilized Alumina/Ethanol Colloidal Dispersion Technique for Seeding High Temperature Air Flows |
| 86. | Description and Simulation of a Fast Packet Switch Architecture for Communication Satellites |
| 87. | Description of a MIL-STD-1553B Data Bus Ada Driver for the LeRC EPS Testbed |
| 88. | Design of a GaAs/Ge Solar Array for Unmanned Aerial Vehicles |
| 89. | Detecting Gear Tooth Fracture in a High Contact Ratio Face Gear Mesh |
| 90. | Development of a 1 kW, 200C Mapham Inverter |
| 91. | Development Status of the NSTAR Ion Propulsion System Power Processor |
| 92. | Diagnosis of Helicopter Gearboxes Using Structure-Based Networks |
| 93. | Diamond and Diamondlike Carbon as Wear-Resistant, Self-Lubricating Coatings for Silicon Nitride |
| 94. | Direct Computation of Sound Radiation by Jet Flow Using Large-Scale Equations |
| 95. | Direct Numerical Simulation of Acoustic Waves Interacting With a Shock Wave in a Quasi-1D Convergent-Divergent Nozzle Using an Unstructured Finite Volume Algorithm |
| 96. | Discharge Ignition Behavior of the Space Station Plasma Contactor |
| 97. | Driving Force Analysis in an Infinite Anisotropic Plate With Multiple Crack Interactions |
| 98. | Dual Active Surface Heat Flux Gage Probe |
| 99. | EEsoF MICAD and ACADEMY Macro Files for Coplanar Waveguide and Finite Ground Plane Coplanar Waveguide |
| 100. | Effect of Hoop Stress on Ball Bearing Life Prediction |
| 101. | Effect of Microgravity on Material Undergoing Melting and Freezing-The TES Experiment |
| 102. | Effect of Velocity and Temperature Distribution at the Hole Exit on Film Cooling of Turbine Blades |
| 103. | Effects of Delaminations on the Damped Dynamic Characteristics of Composite Laminates: Mechanics and Experiments |
| 104. | Effects of Initial Conditions on a Single Jet in Crossflow |
| 105. | Effects of Temperature, Frequency, Flux Density, and Excitation Waveform on the Core Loss and Dynamic B-H Loops of Supermalloy |
| 106. | Effects of Thermal Treatment on Tensile Creep and Stress-Rupture Behavior of Hi-Nicalon SiC Fibers |
| 107. | Electric Field Effects on a Near-Critical Fluid in Microgravity |
| 108. | Electric Propulsion for Geostationary Orbit Insertion |
| 109. | Electrically Heated Tube Investigation of Cooling Channel Geometry Effects |
| 110. | Electromagnetic Radiation in the Plasma Environment Around the Shuttle |
| 111. | Electrostatic Noise in the Plasma Environment Around the Shuttle |
| 112. | EMI Shields Made From Intercalated Graphite Composites |
| 113. | Enhancement of Perfluoropolyether Boundary Lubrication Performance I. Preliminary Results |
| 114. | Essentially Nonoscillatory (ENO) Reconstructions via Extrapolation |
| 115. | Evaluation of F/A-18A HARV Inlet Flow Analysis With Flight Data Final Report |
| 116. | Evaluation of Pd-Cr Wires for Strain Gage Application |
| 117. | Evaluation of Rhenium Joining Methods |
| 118. | Evaluation of Thermal Barrier and PS-200 Self-Lubricating Coatings in an Air-Cooled Rotary Engine |
| 119. | Experimental and Analytical Assessment of the Thermal Behavior of Spiral Bevel Gears |
| 120. | Experimental Results of Hooper's Gravity-Electromagnetic Coupling Concept |
| 121. | Experimental Technique and Assessment for Measuring the Convective Heat Transfer Coefficient From Natural Ice Accretions |
| 122. | Fabry-Perot Interferometer Measurement of Static Temperature and Velocity for ASTOVL Model Tests |
| 123. | Facility for the Evaluation of Space Communications and Related Systems |
| 124. | Fast Track Lunar NTR Systems Assessment for NASA's First Lunar Outpost and its Evolvability to Mars |
| 125. | Feasibility of Coupling Between a Single-Mode Elliptical-Core Fiber and a Single Mode Rib Waveguide Over Temperature |
| 126. | Final Results of the Advanced Photovoltaic Experiment Flight Test |
| 127. | Flow Coefficient Behavior for Boundary Layer Bleed Holes and Slots |
| 128. | Flow Quality Improvements in the NASA Lewis Research Center 9- by 15-Foot Low Speed Wind Tunnel |
| 129. | Friction and Wear Properties of As-Deposited and Carbon Ion-Implanted Diamond Films |
| 130. | Functional Testing of the Space Station Plasma Contactor |
| 131. | Fundamental Concepts of Integrated and Fiber Optic Sensors |
| 132. | Further Investigations of Icing Effects on an Advanced High-Lift Multi-Element Airfoil |
| 133. | Fuzzy Inference Enhanced Information Recovery From Digital PIV Using Cross-Correlation Combined with Particle Tracking |
| 134. | Generation and Computerized Simulation of Meshing and Contact of Modified Involute Helical Gears |
| 135. | Grid Orthogonality Effects on Predicted Turbine Midspan Heat Transfer and Performance |
| 136. | Grid Resolution and Turbulent Inflow Boundary Condition Recommendations for NPARC Calculations |
| 137. | Hall Thruster Ion Beam Characterization |
| 138. | Heat Transfer Predictions for Two Turbine Nozzle Geometries at High Reynolds and Mach Numbers |
| 139. | High Pressure, Earth Storable Rocket Technology Basic Program Final Report |
| 140. | High Temperature Composites |
| 141. | Highlights of the Zeno Results From the USMP-2 Mission |
| 142. | Human Exploration and Settlement of the Moon Using LUNOX-Augmented NTR Propulsion |
| 143. | Human Lunar Mission Capabilities Using SSTO, ISRU and LOX-Augmented NTR Technologies-A Preliminary Assessment |
| 144. | Hybrid Upwind Splitting (HUS) by a Field-by-Field Decomposition |
| 145. | Ice Accretion with Varying Surface Tension |
| 146. | Improved Formulation of Large Signal Phenomena in a High Power Relativistic Klystron |
| 147. | Improved Speed Control System for an 87,000 HP Wind Tunnel Drive |
| 148. | Industry-Wide Workshop on Computational Turbulence Modeling |
| 149. | Influence of Power System Technology on Electric Propulsion Missions |
| 150. | Influence of Tooth Profile Modification on Spur Gear Dynamic Tooth Strain |
| 151. | Initial Results From the Solar Dynamic (SD) Ground Test Demonstration (GTD) Project at NASA Lewis |
| 152. | Inlet Flow Test Calibration for a Small Axial Compressor Rig: Part II. CFD Compared With Experimental Results |
| 153. | Instantaneous 2D Velocity and Temperature Measurements in High Speed Flows Based on Spectrally Resolved Molecular Rayleigh Scattering |
| 154. | Instantaneous Flow Measurements in a Supersonic Wind Tunnel Using Spectrally Resolved Rayleigh Scattering |
| 155. | Institute for Computational Mechanics in Propulsion (ICOMP) |
| 156. | Integrated Cryogenic Satellite Communications Cross-Link Receiver Experiment |
| 157. | Integrated Flight and Propulsion Controls for Advanced Aircraft Configurations |
| 158. | Integration Issues of a Plasma Contactor Power Electronics Unit |
| 159. | Investigation of Convection and Pressure Treatment with Splitting Techniques |
| 160. | Investigation of Water Droplet Trajectories Within the NASA Icing Research Tunnel |
| 161. | Issues in ATM Support of High-Performance, Geographically Distributed Computing |
| 162. | Jet Mixing and Emission Characteristics of Transverse Jets in Annular and Cylindrical Confined Crossflow |
| 163. | Jet Mixing in a Reacting Cylindrical Crossflow |
| 164. | Ka-Band MMIC Subarray Technology Program (Ka-Mist) |
| 165. | Laser Doppler Velocimeter System for Subsonic Jet Mixer Nozzle Testing at the NASA Lewis Aeroacoustic Propulsion Lab |
| 166. | Leading Edge Film Cooling Effects on Turbine Blade Heat Transfer |
| 167. | Linearly Tapered Slot Antenna Impedance Characteristics |
| 168. | Liquid Crystal Point Diffraction Interferometer |
| 169. | Liquid Nitrogen Temperature Operation of a Switching Power Converter |
| 170. | Long Life Testing of Oxide-Coated Iridium/Rhenium Rockets |
| 171. | Low-Order Nonlinear Dynamic Model of IC Engine-Variable Pitch Propeller System for General Aviation Aircraft |
| 172. | Low-Temperature Operation of a Buck DC/DC Converter |
| 173. | Measurement of Gust Response on a Turbine Cascade |
| 174. | Metallized Gelled Propellants: Oxygen/RP-1/Aluminum Rocket Combustion Experiments |
| 175. | Methods for Scaling Icing Test Conditions |
| 176. | Microgravity Combustion Science: 1995 Program Update |
| 177. | Micromechanics of Composites With Shape Memory Alloy Fibers in Uniform Thermal Fields |
| 178. | Microstructural and Strength Stability of a Developmental CVD SiC Fiber |
| 179. | Millennium Modem/Channelizer Special Test Equipment |
| 180. | Minimization of the Vibration Energy of Thin-Plate Structures and the Application to the Reduction of Gearbox Vibration |
| 181. | Minority-Carrier Lifetime in InP as a Function of Light Bias |
| 182. | Modeling the Role of Dislocation Substructure During Class M and Exponential Creep |
| 183. | Motor Drive Technologies for the Power-By-Wire (PBW) Program: Options, Trends and Tradeoffs |
| 184. | NASA 30 cm Ion Thruster Development Status |
| 185. | NASA Lewis Research Center's Combustor Test Facilities and Capabilities |
| 186. | NiAl and NiAl-Based Composites Directionally Solidified by a Containerless Zone Process |
| 187. | NSTAR Ion Thruster Plume Impacts Assessments |
| 188. | Nuclear Thermal Rocket/Vehicle Design Options for Future NASA Missions to the Moon and Mars |
| 189. | Numerical Analysis of Intra-Cavity and Power-Stream Flow Interaction in Multiple Gas-Turbine Disk-Cavities |
| 190. | Numerical Modeling of Bridgman Growth of PbSnTe in a Magnetic Field |
| 191. | Numerical Simulation of Flow in a Whirling Annular Seal and Comparison With Experiments |
| 192. | Numerical Simulation of Heat and Mass Transport During Space Crystal Growth With MEPHISTO |
| 193. | Numerical Study of Contaminant Effects on Combustion of Hydrogen, Ethane and Methane in Air |
| 194. | Object-Oriented Approach for Gas Turbine Engine Simulation |
| 195. | Observation of Flow and Temperature Oscillations Around a Bubble on a Solid Surface Subject to a Vertical Temperature Gradient |
| 196. | On the Application of Chimera/Unstructured Hybrid Grids for Conjugate Heat Transfer |
| 197. | On the Finite Element Implementation of the Generalized Method of Cells Micromechanics Constitutive Model |
| 198. | On the Use of Linearized Euler Equations in the Prediction of Jet Noise |
| 199. | Operating Capability and Current Status of the Reactivated NASA Lewis Research Center Hypersonic Tunnel Facility |
| 200. | Operational Characteristics of a 200 °C LC Parallel Resonant Circuit |
| 201. | Ophthalmic Diagnostics Using a New Dynamic Light Scattering Fiber Optic Probe |
| 202. | Optical Techniques for Shock Visualization and Detection |
| 203. | Optimization of Wave Rotors for Use as Gas Turbine Engine Topping Cycles |
| 204. | Overview of the Solar Dynamic Ground Test Demonstration Program at the NASA Lewis Research Center |
| 205. | Oxidation Mechanisms of Toluene and Benzene |
| 206. | Parallel Navier-Stokes Computations on Shared and Distributed Memory Architectures |
| 207. | Parametrics on 2D Navier-Stokes Analysis of a Mach 2.68 Bifurcated Rectangular Mixed-Compression Inlet |
| 208. | PC Software Graphics Tool for Conceptual Design of Space/Planetary Electrical Power Systems |
| 209. | Performance of a Miniaturized Arcjet |
| 210. | Performance of Ga0.47In0.53As Cells Over a Range of Proton Energies |
| 211. | Planar Imaging of Hydroxyl in a High Temperature, High Pressure Combustion Facility |
| 212. | Power Control Electronics for Cryogenic Instrumentation |
| 213. | PPT Thrust Stand |
| 214. | Prediction of Pressurant Mass Requirements for Axisymmetric Liquid Hydrogen Tanks |
| 215. | Prediction of Wind Tunnel Effects on the Installed F/A-18A Inlet Flow Field at High Angles-of-Attack |
| 216. | Preliminary Assessment of Combustion Modes for Internal Combustion Wave Rotors |
| 217. | Preliminary Design of a SP-100/Stirling Radiatively Coupled Heat Exchanger |
| 218. | Preliminary Evaluation of PS300: A New Self-Lubricating High Temperature Composite Coating for Use to 800 °C. |
| 219. | Preloaded Joint Analysis Methodology for Space Flight Systems |
| 220. | Prestraining and Its Influence on Subsequent Fatigue Life |
| 221. | Proceedings of the XIV Space Photovoltaic Research and Technology Conference (SPRAT XIV) |
| 222. | Pulsed Laser Illumination of Photovoltaic Cells |
| 223. | Quality Audit in the Fastener Industry |
| 224. | Rapid Calibration of Seven-Hole Probes |
| 225. | Reactively Deposited Aluminum Oxide and Fluoropolymer Filled Aluminum Oxide Protective Coatings for Polymers |
| 226. | Recent Improvements to and Validation of the One Dimensional NASA Wave Rotor Model |
| 227. | Reliability Analysis of Uniaxially Ground Brittle Materials |
| 228. | Research & Technology 1994 |
| 229. | Rhenium Material Properties |
| 230. | Ring-Plane Traveling-Wave Tube Slow-Wave Circuit Design Simulations at V-Band Frequencies |
| 231. | Robotic Planetary Science Missions Enabled With Small NTR Engine/Stage Technologies |
| 232. | Robust Integration Schemes for Generalized Viscoplasticity With Internal-State Variables Part I Theoretical Developments and Applications |
| 233. | Robust Integration Schemes for Generalized Viscoplasticity With Internal-State Variables Part II Algorithmic Developments and Implementation |
| 234. | Robust Quantitative Measurement of Flows and Transparent or Highly Reflective Objects |
| 235. | Robust Rocket Engine Concept |
| 236. | SEEK-A Fortran Optimization Program Using a Feasible Directions Gradient Search |
| 237. | Semiempirical Analysis of Surface Alloy Formation |
| 238. | Sensitivity of Combustion-Acoustic Instabilities to Boundary Conditions for Premixed Gas Turbine Combustors |
| 239. | Silicon Carbide-Based Hydrogen and Hydrocarbon Gas Detection |
| 240. | Space Electrochemical Research and Technology Abstracts |
| 241. | Space Mechanisms Lessons Learned Study Volume II-Literature Review |
| 242. | Space Mechanisms Lessons Learned Study Volume I-Summary |
| 243. | Space Power Facility Readiness for Space Station Power System Testing |
| 244. | Space Qualified Hybrid Superconductor/Semiconductor Planar Oscillator Circuit |
| 245. | Spreading Characteristics and Thrust of Jets From Asymmetric Nozzles |
| 246. | SSME HPOTP Post-Test Diagnostic System Enhancement Project |
| 247. | Stable H Controller Design for the Longitudinal Dynamics of an Aircraft |
| 248. | Static Flow Characteristics of a Mass Flow Injecting Valve |
| 249. | Static Stability of a Three-Dimensional Space Truss |
| 250. | Static Stability of the Space Station Solar Array FASTMast Structure |
| 251. | Studies of Two-Phase Gas-Liquid Flow in Microgravity |
| 252. | Study of Compressible Flow Through a Rectangular-to-Semiannular Transition Duct |
| 253. | Study of the Kinematic and Load Sharing Properties of Wormgearing With Non-Symmetric Tooth Profiles |
| 254. | Subband Quantum Scattering Times for AlGaAs/GaAs Obtained Using Digital Filtering |
| 255. | Summary Report of Mission Acceleration Measurements for STS-65 Launched July 8, 1994 |
| 256. | Summary Report of Mission Acceleration Measurements for STS-66 Launched November 3, 1994 |
| 257. | Supersonic Coaxial Jet Noise Predictions |
| 258. | Supersonic Jet Noise Reductions Predicted With Increased Jet Spreading Rate |
| 259. | Supplemental Multilayer Insulation Research Facility |
| 260. | Surface Modeling, Grid Generation, and Related Issues in Computational Fluid Dynamic (CFD) Solutions |
| 261. | T/BEST: Technology Benefit Estimator Select Features and Applications |
| 262. | Temperature Dependent Cyclic Deformation Mechanisms in Haynes 188 Superalloy |
| 263. | The BMDO Thruster-on-a-Pallet Program |
| 264. | The Effect of Adding Roughness and Thickness to a Transonic Axial Compressor Rotor |
| 265. | The Effect of Temperature on the Radiative Performance of Ho-YAG Thin Film Selective Emitters |
| 266. | The Effects of Fiber Surface Modification and Thermal Aging on Composite Toughness and Its Measurement |
| 267. | The Method of Space-Time Conservation Element and Solution Element-Applications to One-Dimensional and Two-Dimensional Time-Marching Flow Problems |
| 268. | The Method of Space-Time Conservation Element and Solution Element-Development of a New Implicit Solver |
| 269. | The NASA On-Board Propulsion Program |
| 270. | The Origin of Spurious Solutions in Computational Electromagnetics |
| 271. | The Space-Time Solution Element Method-A New Numerical Approach for the Navier-Stokes Equations |
| 272. | The Surface Fatigue Life of Contour Induction Hardened AISI 1552 Gears |
| 273. | Theoretical and Experimental Emittance Measurements for a Thin Liquid Sheet Flow |
| 274. | Thermal and Structural Analysis of a Hollow Core Space Shuttle Main Engine (SSME) Turbine Blade |
| 275. | Thermal Barrier Coating Workshop |
| 276. | Thermal Barrier Coating Workshop Abstracts |
| 277. | Thermal Stability of Hi-Nicalon SiC Fiber in Nitrogen and Silicon Environments |
| 278. | Thermochemical Degradation Mechanisms for the Reinforced Carbon/Carbon Panels on the Space Shuttle |
| 279. | Thermoelastic Theory for the Response of Materials Functionally Graded in Two Directions With Applications to the Free-Edge Problem |
| 280. | Thermographic Imaging for High-Temperature Composite Materials - A Defect Detection Study |
| 281. | Thermomechanical Fatigue Behavior of Three CFCC's |
| 282. | Third International Microgravity Combustion Workshop |
| 283. | Third NASA Workshop on Wiring for Space Applications |
| 284. | Three-Dimensional Simulation of Traveling-Wave Tube Cold-Test Characteristics Using MAFIA |
| 285. | Three-Dimensional Structure in a Supersonic Jet: Behavior Near Centerline |
| 286. | Transmission Diagnostic Research at NASA Lewis Research Center |
| 287. | Two-Dimensional Imaging of OH in a Lean Burning High Pressure Combustor |
| 288. | Two-Phase Flow Research Using the Learjet Apparatus |
| 289. | Unsteady Aerodynamic Models for Turbomachinery Aeroelastic and Aeroacoustic Applications |
| 290. | Use of Advanced Solar Cells for Commercial Communication Satellites |
| 291. | Use of the PARC Code to Estimate the Off-Design Transonic Performance of an Over/Under Turboramjet Nozzle |
| 292. | User's Guide for ECAP2D: An Euler Unsteady Aerodynamic and Aeroelastic Analysis Program for Two Dimensional Oscillating Cascades Version 1.0 |
| 293. | Using Hob Offset to Balance Dynamic Strength in Spur Gears |
| 294. | Vibration Analysis of a Split Path Gearbox |
| 295. | Wave Journal Bearing Part I: Analysis |
| 296. | Wave Journal Bearing Part II: Experimental Pressure Measurements and Fractional Frequency Whirl Threshold for Wave and Plain Journal Bearings |
| 297. | Wave Rotor-Enhanced Gas Turbine Engines |
| 298. | Wear-Resistant, Self-Lubricating Surfaces of Diamond Coatings |
| 299. | Wide Temperature Operation of a PWM DC-DC Converter |
| 300. | Wormgear Geometry Adopted for Implementing Hydrostatic Lubrication and Formulation of the Lubrication Problem |
| 301. | X Based Interactive Computer Graphics Applications for Aerodynamic Design and Education |