Titles available from 1995

  1. 1994 Fiber Optic Sensors for Aerospace Technology (FOSAT) Workshop
  2. 2.3 kW Ion Thruster Wear Test
  3. 3D Navier-Stokes Analysis of a Mach 2.68 Bifurcated Rectangular Mixed-Compression Inlet
  4. 77 K Operation of a Multi-Resonant Power Converter
  5. A 75 Watt, 59 to 64 GHz Space TWT
  6. A Combined Geometric Approach for Solving the Navier-Stokes Equations on Dynamic Grids
  7. A Compact Fiber Optic Eye Diagnostic System
  8. A Compact Fiber Optic Eye Diagnostics System
  9. A Comparison of Multivariable Control Design Techniques for a Turbofan Engine Control
  10. A Coupled Layerwise Analysis of the Thermopiezoelectric Response of Smart Composite Beams
  11. A Fully Associative, Nonisothermal, Nonlinear Kinematic, Unified Viscoplastic Model for Titanium Alloys
  12. A Fundamental Study of Smoldering With Emphasis on Experimental Design for Zero-G
  13. A Heated Tube Facility for Rocket Coolant Channel Research
  14. A Hydrogen Leak Detection System for Aerospace and Commercial Applications
  15. A Laser-Based Ice Shape Profilometer for Use in Icing Wind Tunnels
  16. A Method for Exploiting Redundancy to Accommodate Actuator Limits in Multivariable Systems
  17. A New Antiwear Additive/Surface Pretreatment for PFPE Liquid Lubricants
  18. A New Cu-8 Cr-4 Nb Alloy for High Temperature Applications
  19. A New Tribological Test for Candidate Brush Seal Materials Evaluation
  20. A Numerical Model for Dynamic Wave Rotor Analysis
  21. A Numerical Study of the Effect of Wake Passing on Turbine Blade Film Cooling
  22. A PC Program for Estimating Measurement Uncertainty for Aeronautics Test Instrumentation
  23. A Phase-Stepped Point Diffraction Interferometer Using Liquid Crystals
  24. A Review of Nickel Hydrogen Battery Technology
  25. A Simulation Technique for Predicting Thickness of Thermal Sprayed Coatings
  26. A Study of Elevated Temperature Testing Techniques for the Fatigue Behavior of PMCS: Application to T650-35/AMB21
  27. A Summary of the Slush Hydrogen Technology Program for the National Aero-Space Plane
  28. A System Simulation Development Project: Leveraging Resources Through Partnerships
  29. A Transient Model of the RL10A-3-3A Rocket Engine
  30. A Turbulence Module for the NPARC Code
  31. A Unique, Optically Accessible Flame Tube Facility for Lean Combustor Studies
  32. A Zonal Approach for Prediction of Jet Noise
  33. A k-w Turbulence Model for Quasi-Three-Dimensional Turbomachinery Flows
  34. ACTS On-Orbit Multibeam Antenna Pattern Measurements
  35. Ablative Material Testing for Low-Pressure, Low-Cost Rocket Engines
  36. Accelerated Testing of Space Mechanisms
  37. Acoustic Scattering From Ellipses by the Modal Element Method
  38. Acousto-Ultrasonic Decay in Metal Matrix Composite Panels
  39. Actively Controlled Shaft Seals for Aerospace Applications
  40. Adaptive Graphical User Interface Framework for Object-Oriented System Simulations
  41. Additional Improvements to the NASA Lewis Ice Accretion Code LEWICE
  42. Adhesion, Friction, and Wear Behavior of Clean Metal-Ceramic Couples
  43. Advanced Analysis Technique for the Evaluation of Linear Alternators and Linear Motors
  44. Advanced Communications Technology Satellite (ACTS): Design and On-orbit Performance Measurements
  45. Advanced Small Rocket Chambers Option 3-110 lbf Ir-Re Rocket Volume I and II
  46. Advanced k-epsilon Modeling of Heat Transfer
  47. Aerodynamic Evaluation of Two Compact Radial-Inflow Turbine Rotors
  48. Alternative Packet Switch Architectures for a 30/20 GHz FDMA/TDMA Geostationary Communication Satellite Network
  49. An Accelerated Development, Reduced Cost Approach to Lunar/Mars Exploration Using a Modular NTR-Based Space Transportation System
  50. An Active Homopolar Magnetic Bearing With High Temperature Superconductor Coils and Ferromagnetic Cores
  51. An Active Magnetic Bearing With High Tc Superconducting Coils and Ferromagnetic Cores
  52. An Adaptive Semi-Implicit Scheme for Simulations of Unsteady Viscous Compressible Flows
  53. An Analytic Approximation to Very High Specific Impulse and Specific Power Interplanetary Space Mission Analysis
  54. An Approach to the Development of Numerical Algorithms for First Order Linear Hyperbolic Systems in Multiple Space Dimensions: The Constant Coefficient Case
  55. An Assessment of Artificial Damping Models for Aeroacoustic Calculations
  56. An Axial-Torsional, Thermomechanical Fatigue Testing Technique
  57. An Efficient Numerical Procedure for Thermohydrodynamic Analysis of Cavitating Bearings
  58. An Evaluation of a Coupled Microstructural Approach for the Analysis of Functionally Graded Composites via the Finite-Element Method
  59. An Experimental and Analytical Investigation of Stirling Space Power Converter Heater Head
  60. An Integration of the Turbojet and Single-Throat Ramjet
  61. An Open Simulation System Model for Scientific Applications
  62. An Optimized Integrator Windup Protection Technique Applied to a Turbofan Engine Control
  63. An Outflow Boundary Condition for Aeroacoustic Computations
  64. An X-Band Mixer Engineered for 77-K Operation
  65. Analysis of Shadowing Effects on MIR Photovoltaic and Solar Dynamic Power Systems
  66. Analysis of Shadowing Effects on Spacecraft Power Systems
  67. Analysis of Solar Receiver Flux Distributions for US/Russian Solar Dynamic System Demonstration on the MIR Space Station
  68. Analysis of the Defect Structure of B2 FeAl Alloys
  69. Analysis of the Progressive Failure of Brittle Matrix Composites
  70. Application of Pressure Sensitive Paint in Hypersonic Flows
  71. Application of Thin-Film Thermocouples to Localized Heat Transfer Measurements
  72. Application of the Space-Time Conservation Element and Solution Element Method to Two-Dimensional Advection-Diffusion Problems
  73. Applications Catalog of Pyrotechnically Actuated Devices/Systems
  74. Applications of Direct Numerical Simulation of Turbulence in Second Order Closures
  75. Atomic Oxygen Durability Evaluation of Protected Polymers Using Thermal Energy Plasma Systems
  76. Atomic Oxygen Textured Polymers
  77. Au/Cr Sputter Coating for the Protection of Alumina During Sliding at High Temperatures
  78. Automatic Radiated Susceptibility Test System for Payload Equipment
  79. Axisymmetric Inlet Minimum Weight Design Method
  80. Bell Helicopter Advanced Rotorcraft Transmission (ART) Program
  81. Bending Strength Model for Internal Spur Gear Teeth
  82. Bibliography of NASA-Related Publications on Wind Turbine Technology 1973-1995
  83. Broadband Uniplanar Microstrip to Slot-Line Transitions
  84. Bulk Properties of Ni3Al(g ') With Cu and Au Additions
  85. CVD Silicon Carbide Monofilament Reinforced SrO-Al2O3-2SiO2 (SAS) Glass-Ceramic Composites
  86. Calculated Coupling Efficiency Between an Elliptical-Core Optical Fiber and a Silicon Oxynitride Rib Waveguide
  87. Calculated Coupling Efficiency Between an Elliptical-Core Optical Fiber and an Optical Waveguide Over Temperature
  88. Calculation of Kinetic Rate Constants From Thermodynamic Data
  89. Calculations of Diffuser Flows With an Anisotropic K-e Model
  90. Center for Modeling of Turbulence and Transition: Research Briefs-1995
  91. Centrifugal and Axial Pump Design and Off-Design Performance Prediction
  92. Challenges in Aeropropulsion
  93. Characterization of Cobalt-Dipped Nickel Electrodes With Fibrex Substrates
  94. Characterization of the Transport Properties of Channel Delta-Doped Structures by Light-Modulated Shubnikov-de Haas Measurements
  95. Collection Efficiency and Ice Accretion Calculations for a Sphere, a Swept MS(1)-317 Wing, a Swept NACA-0012 Wing Tip, an Axisymmetric Inlet, and a Boeing 737-300 Inlet
  96. Combining Comparison Functions and Finite Element Approximations in CFD
  97. Comparison of Life Theories for Rolling-Element Bearings
  98. Completed Beltrami-Michell Formulation for Analyzing Mixed Boundary Value Problems in Elasticity
  99. Composite Heat Pipe Development Status: Development of Lightweight Prototype Carbon-Carbon Heat Pipe With Integral Fins and Metal Foil Liner
  100. Compression Mass Gauge Testing in a Liquid Hydrogen Dewar
  101. Computation of Noise Radiation From Turbofans: A Parametric Study
  102. Computational Study of Flow Establishment in Hypersonic Pulse Facilities
  103. Computational Study of Flow Establishment in a Ram Accelerator
  104. Computations of Viscous Flows in Complex Geometries Using Multiblock Grid Systems
  105. Computerized Design and Generation of Low-Noise Gears With Localized Bearing Contact
  106. Controls Concepts for Next Generation Reuseable Rocket Engines
  107. Convective Heat Transfer From Castings of Ice Roughened Surfaces in Horizontal Flight
  108. Correction Factor for Determining the London Penetration Depth from Strip Resonators
  109. Crossflow Mixing of Noncircular Jets
  110. Cryogenic and Simulated Fuel Jet Breakup in Argon, Helium and Nitrogen Gasflows
  111. Damage-Mitigating Control of a Reusable Rocket Engine for High Performance and Extended Life
  112. Demonstration of a Stabilized Alumina/Ethanol Colloidal Dispersion Technique for Seeding High Temperature Air Flows
  113. Description and Simulation of a Fast Packet Switch Architecture for Communication Satellites
  114. Description of a MIL-STD-1553B Data Bus Ada Driver for the LeRC EPS Testbed
  115. Design Geometry and Design/Off-Design Performance Computer Codes for Compressors and Turbines
  116. Design of a GaAs/Ge Solar Array for Unmanned Aerial Vehicles
  117. Detecting Gear Tooth Fracture in a High Contact Ratio Face Gear Mesh
  118. Development Status of the NSTAR Ion Propulsion System Power Processor
  119. Development of a 1 kW, 200°C Mapham Inverter
  120. Development of a Linearized Unsteady Euler Analysis for Turbomachinery Blade Rows
  121. Diagnosis of Helicopter Gearboxes Using Structure-Based Networks
  122. Diamond and Diamondlike Carbon as Wear-Resistant, Self-Lubricating Coatings for Silicon Nitride
  123. Direct Computation of Sound Radiation by Jet Flow Using Large-Scale Equations
  124. Direct Drive Options for Electric Propulsion Systems
  125. Direct Numerical Simulation of Acoustic Waves Interacting With a Shock Wave in a Quasi-1D Convergent-Divergent Nozzle Using an Unstructured Finite Volume Algorithm
  126. Discharge Ignition Behavior of the Space Station Plasma Contactor
  127. Driving Force Analysis in an Infinite Anisotropic Plate With Multiple Crack Interactions
  128. Dual Active Surface Heat Flux Gage Probe
  129. EEsoF MICAD and ACADEMY Macro Files for Coplanar Waveguide and Finite Ground Plane Coplanar Waveguide
  130. EMI Shields Made From Intercalated Graphite Composites
  131. Effect of Hoop Stress on Ball Bearing Life Prediction
  132. Effect of Microgravity on Material Undergoing Melting and Freezing-The TES Experiment
  133. Effect of Velocity and Temperature Distribution at the Hole Exit on Film Cooling of Turbine Blades
  134. Effects of Delaminations on the Damped Dynamic Characteristics of Composite Laminates: Mechanics and Experiments
  135. Effects of Initial Conditions on a Single Jet in Crossflow
  136. Effects of Temperature, Frequency, Flux Density, and Excitation Waveform on the Core Loss and Dynamic B-H Loops of Supermalloy
  137. Effects of Thermal Treatment on Tensile Creep and Stress-Rupture Behavior of Hi-Nicalon SiC Fibers
  138. Effects of Thermal and Electrical Stressing on the Breakdown Behavior of Space Wiring
  139. Electric Field Effects on a Near-Critical Fluid in Microgravity
  140. Electric Propulsion for Geostationary Orbit Insertion
  141. Electrically Heated Tube Investigation of Cooling Channel Geometry Effects
  142. Electromagnetic Radiation in the Plasma Environment Around the Shuttle
  143. Electronic Availability of Microgravity Experiments Safety and Integration Requirements Documents
  144. Electrostatic Noise in the Plasma Environment Around the Shuttle
  145. Enhanced Analysis and Users Manual for Radial-Inflow Turbine Conceptual Design Code RTD
  146. Enhancement of Perfluoropolyether Boundary Lubrication Performance I. Preliminary Results
  147. Essentially Nonoscillatory (ENO) Reconstructions via Extrapolation
  148. Evaluation of F/A-18A HARV Inlet Flow Analysis With Flight Data Final Report
  149. Evaluation of Pd-Cr Wires for Strain Gage Application
  150. Evaluation of Rhenium Joining Methods
  151. Evaluation of Thermal Barrier and PS-200 Self-Lubricating Coatings in an Air-Cooled Rotary Engine
  152. Experimental Results of Hooper's Gravity-Electromagnetic Coupling Concept
  153. Experimental Technique and Assessment for Measuring the Convective Heat Transfer Coefficient From Natural Ice Accretions
  154. Experimental and Analytical Assessment of the Thermal Behavior of Spiral Bevel Gears
  155. Experimental and Computational Investigation of the Tip Clearance Flow in a Transonic Axial Compressor Rotor
  156. FPCAS3D User' s Guide: A Three Dimensional Full Potential Aeroelastic Program Version 1.0
  157. Fabry-Perot Interferometer Measurement of Static Temperature and Velocity for ASTOVL Model Tests
  158. Facility for the Evaluation of Space Communications and Related Systems
  159. Fast Track Lunar NTR Systems Assessment for NASA's First Lunar Outpost and its Evolvability to Mars
  160. Feasibility of Coupling Between a Single-Mode Elliptical-Core Fiber and a Single Mode Rib Waveguide Over Temperature
  161. Fiber-Optic Based Compact Gas Leak Detection System
  162. Final Results of the Advanced Photovoltaic Experiment Flight Test
  163. Flow Coefficient Behavior for Boundary Layer Bleed Holes and Slots
  164. Flow Quality Improvements in the NASA Lewis Research Center 9- by15-Foot Low Speed Wind Tunnel
  165. Friction and Wear Properties of As-Deposited and Carbon Ion-Implanted Diamond Films
  166. Full-Scale Direct Numerical Simulation of Two- and Three-Dimensional Instabilities and Rivulet Formation in Heated Falling Films
  167. Functional Testing of the Space Station Plasma Contactor
  168. Fundamental Concepts of Integrated and Fiber Optic Sensors
  169. Further Investigations of Icing Effects on an Advanced High-Lift Multi-Element Airfoil
  170. Fuzzy Inference Enhanced Information Recovery From Digital PIV Using Cross-Correlation Combined with Particle Tracking
  171. Generation and Computerized Simulation of Meshing and Contact of Modified Involute Helical Gears
  172. Genetic Algorithms as Global Random Search Methods
  173. Grid Orthogonality Effects on Predicted Turbine Midspan Heat Transfer and Performance
  174. Grid Resolution and Turbulent Inflow Boundary Condition Recommendations for NPARC Calculations
  175. Hall Thruster Ion Beam Characterization
  176. Heat Transfer Predictions for Two Turbine Nozzle Geometries at High Reynolds and Mach Numbers
  177. Heat Treatment Effects on the Tensile Properties and Microstructures of a SiC/RBSN Composite in Nitrogen
  178. High Pressure, Earth Storable Rocket Technology Basic Program Final Report
  179. High Resolution X-Ray Based Strain Measurements for Hostile Environments
  180. High Temperature Barrier Coatings for Refractory Metals
  181. High Temperature Composites
  182. High Temperature Kinetic Study of the Reactions H + O2 = OH + O and O + H2 = OH + H in H2/O2 System by Shock Tube - Laser Absorption Spectroscopy
  183. High-Power Ion Thruster Technology
  184. Highlights of the Zeno Results From the USMP-2 Mission
  185. Human Exploration and Settlement of the Moon Using LUNOX-Augmented NTR Propulsion
  186. Human Lunar Mission Capabilities Using SSTO, ISRU and LOX-Augmented NTR Technologies-A Preliminary Assessment
  187. Hybrid Upwind Splitting (HUS) by a Field-by-Field Decomposition
  188. Ice Accretion with Varying Surface Tension
  189. Improved Formulation of Large Signal Phenomena in a High Power Relativistic Klystron
  190. Improved L-C Resonant Decay Technique for Q Measurement of Quasilinear Power Inductors: New Results for MPP and Ferrite Powdered Cores
  191. Improved Speed Control System for an 87,000 HP Wind Tunnel Drive
  192. In-Phase Thermomechanical Fatigue Mechanisms in an Unidirectional SCS-6/Ti 15-3 MMC
  193. Industry-Wide Workshop on Computational Turbulence Modeling
  194. Influence of Fiber Architecture on the Elastic and Inelastic Response of Metal Matrix Composites
  195. Influence of Geometry and Flow Variations on NO Formation in the Quick Mixer of a Staged Combustor
  196. Influence of Power System Technology on Electric Propulsion Missions
  197. Influence of Tooth Profile Modification on Spur Gear Dynamic Tooth Strain
  198. Information Switching Processor (ISP) Contention Analysis and Control
  199. Initial Results From the Solar Dynamic (SD) Ground Test Demonstration (GTD) Project at NASA Lewis
  200. Inlet Flow Test Calibration for a Small Axial Compressor Rig: Part II. CFD Compared With Experimental Results
  201. Instantaneous 2D Velocity and Temperature Measurements in High Speed Flows Based on Spectrally Resolved Molecular Rayleigh Scattering
  202. Instantaneous Flow Measurements in a Supersonic Wind Tunnel Using Spectrally Resolved Rayleigh Scattering
  203. Institute for Computational Mechanics in Propulsion (ICOMP)
  204. Integrated Cryogenic Satellite Communications Cross-Link Receiver Experiment
  205. Integrated Flight and Propulsion Controls for Advanced Aircraft Configurations
  206. Integration Issues of a Plasma Contactor Power Electronics Unit
  207. Interfacial Effects on the Thermal and Mechanical Properties of Graphite/Copper Composites
  208. Investigation of Convection and Pressure Treatment with Splitting Techniques
  209. Investigation of Strain Aging in the Ordered Intermetallic Compound b-NiAl
  210. Investigation of Water Droplet Trajectories Within the NASA Icing Research Tunnel
  211. Issues in ATM Support of High-Performance, Geographically Distributed Computing
  212. Jet Mixing and Emission Characteristics of Transverse Jets in Annular and Cylindrical Confined Crossflow
  213. Jet Mixing in a Reacting Cylindrical Crossflow
  214. Ka-Band MMIC Subarray Technology Program (Ka-Mist)
  215. Large-Amplitude Long-Wave Instability of a Supersonic Shear Layer
  216. Laser Doppler Velocimeter Measurements and Laser Sheet Imaging in an Annular Combustor Model
  217. Laser Doppler Velocimeter System for Subsonic Jet Mixer Nozzle Testing at the NASA Lewis Aeroacoustic Propulsion Lab
  218. Leading Edge Film Cooling Effects on Turbine Blade Heat Transfer
  219. Linearly Tapered Slot Antenna Impedance Characteristics
  220. Liquid Crystal Point Diffraction Interferometer
  221. Liquid Nitrogen Temperature Operation of a Switching Power Converter
  222. Long Life Testing of Oxide-Coated Iridium/Rhenium Rockets
  223. Low Noise Research Fan Stage Design
  224. Low-Order Nonlinear Dynamic Model of IC Engine-Variable Pitch Propeller System for General Aviation Aircraft
  225. Low-Temperature Operation of a Buck DC/DC Converter
  226. Macrosegregation and Nucleation in Undercooled Pb-Sn Alloys
  227. Measurement of Gust Response on a Turbine Cascade
  228. Measurements in Transitional Boundary Layers Under High Free-Stream Turbulence and Strong Acceleration Conditions
  229. Metallized Gelled Propellants: Oxygen/RP-1/Aluminum Rocket Combustion Experiments
  230. Metallographic Analysis of Brush Bristle and Integrity Testing of Brush Seal in Shroud Ring of T-700 Engine
  231. Method for Extracting Forward Acoustic Wave Components from Rotating Microphone Measurements in the Inlets of Turbofan Engines
  232. Methods for Scaling Icing Test Conditions
  233. Microgravity Combustion Science: 1995 Program Update
  234. Microgravity Experiments Safety and Integration Requirements Document Tree
  235. Micromechanics of Composites With Shape Memory Alloy Fibers in Uniform Thermal Fields
  236. Microstructural and Strength Stability of a Developmental CVD SiC Fiber
  237. Microstructure and Properties of Cryomilled Nickel Aluminide Extruded With Chromium or Molybdenum
  238. Millennium Modem/Channelizer Special Test Equipment
  239. Minimization of the Vibration Energy of Thin-Plate Structures and the Application to the Reduction of Gearbox Vibration
  240. Minority-Carrier Lifetime in InP as a Function of Light Bias
  241. Modeling the Role of Dislocation Substructure During Class M and Exponential Creep
  242. Molecular Dynamics Simulation of a Piston Driven Shock Wave in a Hard Sphere Gas
  243. Motor Drive Technologies for the Power-By-Wire (PBW) Program: Options, Trends and Tradeoffs
  244. NASA 30 cm Ion Thruster Development Status
  245. NASA Advanced Refrigerator/Freezer Technology Development Project Overview
  246. NASA Lewis Research Center's Combustor Test Facilities and Capabilities
  247. NASA Low-Speed Axial Compressor for Fundamental Research
  248. NSTAR Ion Thruster Plume Impacts Assessments
  249. NiAl and NiAl-Based Composites Directionally Solidified by a Containerless Zone Process
  250. Nonlinear Stability of Non-Stationary Cross-Flow Vortices in Compressible Boundary Layers
  251. Novel Composites for Wing and Fuselage Applications
  252. Nuclear Thermal Rocket/Vehicle Design Options for Future NASA Missions to the Moon and Mars
  253. Numerical Analysis of Intra-Cavity and Power-Stream Flow Interaction in Multiple Gas-Turbine Disk-Cavities
  254. Numerical Mixing Calculations of Confined Reacting Jet Flows in a Cylindrical Duct
  255. Numerical Modeling of Bridgman Growth of PbSnTe in a Magnetic Field
  256. Numerical Prediction of Turbulent Oscillating Flow and Heat Transfer in Pipes With Various End Geometries
  257. Numerical Simulation of Flow in a Whirling Annular Seal and Comparison With Experiments
  258. Numerical Simulation of Heat and Mass Transport During Space Crystal Growth With MEPHISTO
  259. Numerical Simulation of Supersonic Flow Using a New Analytical Bleed Boundary Condition
  260. Numerical Study of Contaminant Effects on Combustion of Hydrogen, Ethane and Methane in Air
  261. Object-Oriented Approach for Gas Turbine Engine Simulation
  262. Observation of Flow and Temperature Oscillations Around a Bubble on a Solid Surface Subject to a Vertical Temperature Gradient
  263. Off-Design Computer Code for Calculating the Aerodynamic Performance of Axial-Flow Fans and Compressors User's Manual
  264. On High-Order Radiation Boundary Conditions
  265. On the Application of Chimera/Unstructured Hybrid Grids for Conjugate Heat Transfer
  266. On the Conservative Interface Treatment for Multi-Block Viscous Flow Computations
  267. On the Finite Element Implementation of the Generalized Method of Cells Micromechanics Constitutive Model
  268. On the Nonlinear Evolution of a Stationary Cross-Flow Vortex in a Fully Three-Dimensional Boundary Layer Flow
  269. On the Use of Linearized Euler Equations in the Prediction of Jet Noise
  270. Operating Capability and Current Status of the Reactivated NASA Lewis Research Center Hypersonic Tunnel Facility
  271. Operational Characteristics of a 200°C LC Parallel Resonant Circuit
  272. Ophthalmic Diagnostics Using a New Dynamic Light Scattering Fiber Optic Probe
  273. Optical Techniques for Shock Visualization and Detection
  274. Optimization of Wave Rotors for Use as Gas Turbine Engine Topping Cycles
  275. Overview of the Solar Dynamic Ground Test Demonstration Program at the NASA Lewis Research Center
  276. Oxidation Mechanisms of Toluene and Benzene
  277. PARC3D Calculations of the F/A-18A HARV Inlet Vortex Generators
  278. PC Software Graphics Tool for Conceptual Design of Space/Planetary Electrical Power Systems
  279. PPT Thrust Stand
  280. Parallel Computational Environment for Substructure Optimization
  281. Parallel Navier-Stokes Computations on Shared and Distributed Memory Architectures
  282. Parametrics on 2D Navier-Stokes Analysis of a Mach 2.68 Bifurcated Rectangular Mixed-Compression Inlet
  283. Performance of Ga0.47In0.53As Cells Over a Range of Proton Energies
  284. Performance of Partially Fluorinated Polyimide Insulation for Aerospace Applications
  285. Performance of a Miniaturized Arcjet
  286. Planar Imaging of Hydroxyl in a High Temperature, High Pressure Combustion Facility
  287. Power Control Electronics for Cryogenic Instrumentation
  288. Prediction of Pressurant Mass Requirements for Axisymmetric Liquid Hydrogen Tanks
  289. Prediction of Wind Tunnel Effects on the Installed F/A-18A Inlet Flow Field at High Angles-of-Attack
  290. Preliminary Assessment of Combustion Modes for Internal Combustion Wave Rotors
  291. Preliminary Design of a SP-100/Stirling Radiatively Coupled Heat Exchanger
  292. Preliminary Evaluation of PS300: A New Self-Lubricating High Temperature Composite Coating for Use to 800°C.
  293. Preloaded Joint Analysis Methodology for Space Flight Systems
  294. Prestraining and Its Influence on Subsequent Fatigue Life
  295. Probabilistic Analysis of Large-Scale Composite Structures Using the IPACS Code
  296. Probabilistic Material Strength Degradation Model for Inconel 718 Components Subjected to High Temperature, High-Cycle and Low-Cycle Mechanical Fatigue, Creep and Thermal Fatigue Effects
  297. Proceedings of the XIV Space Photovoltaic Research and Technology Conference (SPRAT XIV)
  298. Progressive Wave Expansions and Open Boundary Problems
  299. Pulsed Laser Illumination of Photovoltaic Cells
  300. Pulsed Plasma Thruster Technology for Small Satellite Missions
  301. Quality Audit in the Fastener Industry
  302. Rapid Calibration of Seven-Hole Probes
  303. Reactively Deposited Aluminum Oxide and Fluoropolymer Filled Aluminum Oxide Protective Coatings for Polymers
  304. Real Time Acousto-Ultrasonic NDE Technique for Monitoring Damage in Ceramic Composites Under Dynamic Loads
  305. Recent Improvements to and Validation of the One Dimensional NASA Wave Rotor Model
  306. Relative Performance Comparison Between Baseline Labyrinth and Dual-Brush Compressor Discharge Seals in a T-700 Engine Test
  307. Reliability Analysis of Uniaxially Ground Brittle Materials
  308. Research & Technology 1994
  309. Rhenium Material Properties
  310. Ring-Plane Traveling-Wave Tube Slow-Wave Circuit Design Simulations at V-Band Frequencies
  311. Robotic Planetary Science Missions Enabled With Small NTR Engine/Stage Technologies
  312. Robust Integration Schemes for Generalized Viscoplasticity With Internal-State Variables Part I Theoretical Developments and Applications
  313. Robust Integration Schemes for Generalized Viscoplasticity With Internal-State Variables Part II Algorithmic Developments and Implementation
  314. Robust Quantitative Measurement of Flows and Transparent or Highly Reflective Objects
  315. Robust Rocket Engine Concept
  316. SEEK-A Fortran Optimization Program Using a Feasible Directions Gradient Search
  317. SSME HPOTP Post-Test Diagnostic System Enhancement Project
  318. SSME Post Test Diagnostic System Systems Section
  319. Semiempirical Analysis of Surface Alloy Formation
  320. Sensitivity of Combustion-Acoustic Instabilities to Boundary Conditions for Premixed Gas Turbine Combustors
  321. Silicon Carbide-Based Hydrogen and Hydrocarbon Gas Detection
  322. Simplified Numerical Description of SPT Operation
  323. Simulated Imaging Properties of a Series of Magnetic Electron Lenses
  324. Sixth Annual Thermal and Fluids Analysis Workshop
  325. Sizing of Colloidal Particles and Protein Molecules in a Hanging Fluid Drop
  326. Software Safety Progress in NASA
  327. Space Electrochemical Research and Technology Abstracts
  328. Space Mechanisms Lessons Learned Study Volume I-Summary
  329. Space Mechanisms Lessons Learned Study Volume II-Literature Review
  330. Space Power Facility Readiness for Space Station Power System Testing
  331. Space Qualified Hybrid Superconductor/Semiconductor Planar Oscillator Circuit
  332. Space-Based Communications Infrastructure for Developing Countries
  333. Spontaneous Dewetting of a Perfluoropolyether
  334. Spreading Characteristics and Thrust of Jets From Asymmetric Nozzles
  335. Stable H° Controller Design for the Longitudinal Dynamics of an Aircraft
  336. Static Flow Characteristics of a Mass Flow Injecting Valve
  337. Static Stability of a Three-Dimensional Space Truss
  338. Static Stability of the Space Station Solar Array FASTMast Structure
  339. Structural Optimization Methodology for Rotating Disks of Aircraft Engines
  340. Studies of Two-Phase Gas-Liquid Flow in Microgravity
  341. Study of Compressible Flow Through a Rectangular-to-Semiannular Transition Duct
  342. Study of the Kinematic and Load Sharing Properties of Wormgearing With Non-Symmetric Tooth Profiles
  343. Subband Quantum Scattering Times for AlGaAs/GaAs Obtained Using Digital Filtering
  344. Summary Report of Mission Acceleration Measurements for STS-65 Launched July 8, 1994
  345. Summary Report of Mission Acceleration Measurements for STS-66 Launched November 3, 1994
  346. Supersonic Coaxial Jet Noise Predictions
  347. Supersonic Jet Noise Reductions Predicted With Increased Jet Spreading Rate
  348. Supplemental Multilayer Insulation Research Facility
  349. Surface Modeling, Grid Generation, and Related Issues in Computational Fluid Dynamic (CFD) Solutions
  350. T/BEST: Technology Benefit Estimator Select Features and Applications
  351. TADS-A CFD-Based Turbomachinery and Analysis Design System With GUI Volume I-Method and Results
  352. TADS-A CFD-Based Turbomachinery and Analysis Design System With GUI Volume II-Users's Manual
  353. TROPIX Power System Architecture
  354. Temperature Dependent Cyclic Deformation Mechanisms in Haynes 188 Superalloy
  355. The BMDO Thruster-on-a-Pallet Program
  356. The Decay of Longitudinal Vortices Shed From Airfoil Vortex Generators
  357. The Development of Space Station Objectives
  358. The Effect of Adding Roughness and Thickness to a Transonic Axial Compressor Rotor
  359. The Effect of Interface Properties on Nickel Base Alloy Composites
  360. The Effect of Temperature on the Radiative Performance of Ho-YAG Thin Film Selective Emitters
  361. The Effects of Fiber Surface Modification and Thermal Aging on Composite Toughness and Its Measurement
  362. The Effects of Ion Implantation on the Tribology of Perfluoropolyether- Lubricated 440C Stainless Steel Couples
  363. The Method of Space-Time Conservation Element and Solution Element-Applications to One-Dimensional and Two-Dimensional Time-Marching Flow Problems
  364. The Method of Space-Time Conservation Element and Solution Element-Development of a New Implicit Solver
  365. The NASA On-Board Propulsion Program
  366. The Origin of Spurious Solutions in Computational Electromagnetics
  367. The Space-Time Solution Element Method-A New Numerical Approach for the Navier-Stokes Equations
  368. The Surface Fatigue Life of Contour Induction Hardened AISI 1552 Gears
  369. Theoretical Study of Cathode Surfaces and High-Temperature Superconductors
  370. Theoretical and Experimental Emittance Measurements for a Thin Liquid Sheet Flow
  371. Thermal Barrier Coating Workshop Abstracts
  372. Thermal Barrier Coating Workshop
  373. Thermal Stability of Hi-Nicalon SiC Fiber in Nitrogen and Silicon Environments
  374. Thermal and Structural Analysis of a Hollow Core Space Shuttle Main Engine (SSME) Turbine Blade
  375. Thermochemical Degradation Mechanisms for the Reinforced Carbon/Carbon Panels on the Space Shuttle
  376. Thermoelastic Theory for the Response of Materials Functionally Graded in Two Directions With Applications to the Free-Edge Problem
  377. Thermographic Imaging for High-Temperature Composite Materials - A Defect Detection Study
  378. Thermomechanical Fatigue Behavior of Three CFCC's
  379. Third International Microgravity Combustion Workshop
  380. Third NASA Workshop on Wiring for Space Applications
  381. Three-Dimensional Simulation of Traveling-Wave Tube Cold-Test Characteristics Using MAFIA
  382. Three-Dimensional Structure in a Supersonic Jet: Behavior Near Centerline
  383. Transmission Diagnostic Research at NASA Lewis Research Center
  384. Transport Coefficients for the NASA Lewis Chemical Equilibrium Program
  385. Two-Dimensional Imaging of OH in a Lean Burning High Pressure Combustor
  386. Two-Phase Flow Research Using the Learjet Apparatus
  387. Unsteady Aerodynamic Models for Turbomachinery Aeroelastic and Aeroacoustic Applications
  388. Use of Advanced Solar Cells for Commercial Communication Satellites
  389. Use of the PARC Code to Estimate the Off-Design Transonic Performance of an Over/Under Turboramjet Nozzle
  390. User Manual for NASA Lewis 10- by 10-Foot Supersonic Wind Tunnel
  391. User's Guide for ECAP2D: An Euler Unsteady Aerodynamic and Aeroelastic Analysis Program for Two Dimensional Oscillating Cascades Version 1.0
  392. Users Manual for the Improved NASA Lewis Ice Accretion Code LEWICE 1.6
  393. Using Hob Offset to Balance Dynamic Strength in Spur Gears
  394. Validation of the NPARC Code for Nozzle Afterbody Flows at Transonic Speeds
  395. Vibration Analysis of a Split Path Gearbox
  396. Wave Journal Bearing Part I: Analysis
  397. Wave Journal Bearing Part II: Experimental Pressure Measurements and Fractional Frequency Whirl Threshold for Wave and Plain Journal Bearings
  398. Wave Rotor-Enhanced Gas Turbine Engines
  399. Wear-Resistant, Self-Lubricating Surfaces of Diamond Coatings
  400. Wide Speed Range Turboshaft Study
  401. Wide Temperature Operation of a PWM DC-DC Converter
  402. Wormgear Geometry Adopted for Implementing Hydrostatic Lubrication and Formulation of the Lubrication Problem
  403. X Based Interactive Computer Graphics Applications for Aerodynamic Design and Education

A service of the NASA Glenn Research Center Logistics and Technical Information Division

Suggestions or questions about this site can be directed to:

NASA official: Technical Publications Manager, Sue.E.Butts@nasa.gov

Web curator: Caroline.A.Rist@grc.nasa.gov

Privacy Policy and Important Notices