Titles available from 1991

  1. A CFD Study of Jet Mixing in Reduced Flow Areas for Lower Combustor Emissions
  2. A Comparison of the Calculated and Experimental Off-Design Performance of a Radial Flow Turbine
  3. A Qualitative View of Cryogenic Fluid Injection Into High Speed Flows
  4. Arcjet Thruster Research and Technology, Phase II Final Report
  5. CFD Analysis of Jet Mixing in Low NOx Flametube Combustors
  6. Description of Liquid Nitrogen Experimental Test Facility
  7. Eccentricity Effects on Leakage of a Brush Seal at Low Speeds
  8. Elastic Response of [001]-Oriented PWA 1480 Single Crystal-The Influence of Secondary Orientation
  9. Experimental Ice Shape and Performance Characteristics for a Multi-Element Airfoil in the NASA Lewis Icing Research Tunnel
  10. Experimental Study of Boundary Layer Transition With Elevated Freestream Turbulence on a Heated Flat Plate
  11. Experimental Study of Cross-Stream Mixing in a Cylindrical Duct
  12. Identification of Propulsion Systems
  13. In-Phase and Out-of-Phase Axial-Torsional Fatigue Behavior of Haynes 188 at 760 °C
  14. Infrastructure for Deployment of Power Systems
  15. Investigation of Advanced Counterrotation Blade Configuration Concepts for High Speed Turboprop Systems, Task III-Advanced Fan Section Grid Generator Final Report and Computer Program Users' Manual
  16. LN2 Spray Droplet Size Measurement via Ensemble Diffraction Technique
  17. Mixing and Non-Equilibrium Chemical Reaction in a Compressible Mixing Layer
  18. Mixing of Multiple Jets With a Confined Subsonic Crossflow Summary of NASA-Supported Experiments and Modeling
  19. Nuclear Safety for the Space Exploration Initiative
  20. Paramagnetic Propellant Orientation
  21. Probabilistic Evaluation of Fuselage-Type Composite Structures
  22. Qualitative Investigation of Cryogenic Injected Shock Dissipation
  23. Simulation of Brush Insert for Leading-Edge-Passage Convective Heat Transfer
  24. Simulation of Iced Wing Aerodynamics
  25. Some Preliminary Results of Brush Seal/Rotor Interference Effects on Leakage at Zero and Low RPM Using a Tapered-Plug Rotor
  26. Space Mechanisms Needs for Future NASA Long Duration Space Missions
  27. The Application of Neural Networks to the SSME Startup Transient
  28. The Development of a Post-Test Diagnostic System for Rocket Engines
  29. Tribology Needs for Future Space and Aeronautical Systems
  30. Two-Dimensional Navier-Stokes Heat Transfer Analysis for Rough Turbine Blades

A service of the NASA Glenn Research Center Logistics and Technical Information Division

Suggestions or questions about this site can be directed to:

NASA official: Technical Publications Manager, Sue.E.Butts@nasa.gov

Web curator: Caroline.A.Rist@grc.nasa.gov

Privacy Policy and Important Notices