Titles available from 1983

  1. A Comparison of Flow Rates and Pressure Profiles for N-Sequential Inlets and Three Related Seal Configurations
  2. A Refrigerated Dynamic Seal
  3. Aerothermal Modeling Program,-Phase I Final Report-Volume 1
  4. Aerothermal Modeling Program--Phase I Final Report-Volume II
  5. Analogy Between Fluid Cavitation and Fracture Mechanics
  6. Analytical and Experimental Evaluation of the Heat Transfer Distribution Over the Surfaces of Turbine Vanes
  7. Correlation of Compressive Stress With Spalling of Plasma Sprayed Ceramic Materials
  8. Experiments in Dilution Jet Mixing
  9. Finite Element Formulation for Transient Heat Treat Problems
  10. New Test Techniques and Analytical Procedures for Understanding the Behavior of Advanced Propellers
  11. Perspectives on the Mixing of a Row of Jets With a Confined Crossflow
  12. Residual Stress in Plasma Sprayed Ceramic Turbine Tip and Gas Path Seal Specimens
  13. Studies of Flows Through N-Sequential Orifices
  14. The Effect of Annealing on the Creep of Plasma Sprayed Ceramics
  15. Thermomechanical Loading of Multilayered Cylindrical Geometries in Thermal Cycling from 300 to 1300 K

A service of the NASA Glenn Research Center Logistics and Technical Information Division

Suggestions or questions about this site can be directed to:

NASA official: Technical Publications Manager, Sue.E.Butts@nasa.gov

Web curator: Caroline.A.Rist@grc.nasa.gov

Privacy Policy and Important Notices