GLTRS--Glenn
TITLE AND SUBTITLE:
Fastener Design Manual

AUTHOR(S):
Richard T. Barrett

REPORT DATE:
March 1990

FUNDING NUMBERS:

PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES):
National Aeronautics and Space Administration
Lewis Research Center
Cleveland, Ohio 44135-3191

PERFORMING ORGANIZATION REPORT NUMBER:
E-4911

SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES):
National Aeronautics and Space Administration
Washington, DC 20546-0001

REPORT TYPE AND DATES COVERED:
Reference Publication

SPONSORING/MONITORING AGENCY REPORT NUMBER:
NASA RP-1228

SUPPLEMENTARY NOTES:
Responsible person, Richard T. Barrett.

ABSTRACT:
This manual was written for design engineers to enable them to choose appropriate fasteners for their designs. Subject matter includes fastener material selection, platings, lubricants, corrosion, locking methods, washers, inserts, thread types and classes, fatigue loading, and fastener torque. A section on design criteria covers the derivation of torque formulas, loads on a fastener group, combining simultaneous shear and tension loads, pullout load for tapped holes, grip length, head styles, and fastener strengths. The second half of this manual presents general guidelines and selection criteria for rivets and lockbolts.

SUBJECT TERMS:
Fastener design; Washers; Inserts; Torque table; Rivets; Lockbolts

NUMBER OF PAGES:
98

PDF AVAILABLE FROM URL:
1990/RP-1228.pdf
(9,846,114 KB)
This page contains an Adobe® Acrobat® Reader PDF file. The PDF documents have been created to show thumbnails of each page. If the thumbnails do not display properly, download the file to the hard drive and view through Acrobat® Reader. You can download Acrobat® Reader for free. click

NASA NASA GLTRS--Glenn

A service of the NASA Glenn Research Center Logistics and Technical Information Division

Suggestions or questions about this site can be directed to:

NASA official: Technical Publications Manager, Sue.E.Butts@nasa.gov

Web curator: Caroline.A.Rist@grc.nasa.gov

Privacy Policy and Important Notices